Wulf Mods Ari Knife Kit Manual

How to charge the Wulf Mods Ari Knife Kit

1. Get a USB Type-C charging cable.
2. Connect the charging cable to the charging port of the Wulf Mods Ari Knife Kit.
3. Connect the other side of the cable to a wall charger.

Note: The Wulf Mods Ari Knife Kit does not come with a USB Type-C charging cable or a wall adapter.

How to power in the Wulf Mods Ari Knife Kit

1. Make sure to fully charge the Wulf Mods Ari Knife Kit.
2. Press the power button five times to power on the Wulf Mods Ari Knife Kit.
3. Press the power button another five times to turn it off.

Note: The power button is the square button on the device.

How to cut the wax using the Wulf Mods Ari Knife Kit

1. Make sure to power the device on.
2. Select your preferred voltage level and activate the Wulf Mods Ari Knife Kit.
3. While the tip is heating, cut and scoop up the wax.

Note: From here, you can either continue heating up the wax and spread it evenly on your vaporizer or your banger.

How to change the temperature of the Wulf Mods Ari Knife Kit

1. Make sure it is powered on.
2. Reach for the bottom part of the Wulf Mods Ari Knife Kit.
3. Twist the base and make sure the “red” marker is aligned with the voltage level of your choice.

How to vape with the Wulf Mods Ari Knife Kit

1. Connect an oil cartridge to the Wulf Mods Ari Knife Kit.
2. Tighten the cartridge by twisting it clockwise.
3. Loosen the cartridge by twisting it counter clockwise.
4. Activate the heating element and wait for the Wulf Mods Ari Knife Kit to vaporize your oils.

How to clean the Wulf Mods Ari Knife Kit

1. Turn off the Wulf Mods Ari Knife Kit.
2. Remove any connected cartridge or heating tip.
3. Use a dried cloth to wipe any residual material.