Wulf Mods Flora Dry Herb Vaporizer Manual

Charging the Wulf Mods Flora Dry Herb Vaporizer

1. Take the USB type-C charging cable included in the box.
2. Connect it to the Wulf Mods Flora Dry Herb Vaporizer battery.
3. Get a compatible wall adapter.
4. Plug the wall adapter to a wall socket.

Note: The charging port is located at the bottom part of the battery. If you can’t find a wall adapter, you can connect it to your computer. Per the manufacturer, avoid charging the Wulf Mods Flora Dry Herb Vaporizer with a powerbank with five volts or higher. Do not charge in your car or overcharge the battery as this can result in battery damage and frying of the internal system.

Preparing the Wulf Mods Flora Dry Herb Vaporizer

1. Make sure to fully charge the Wulf Mods Flora Dry Herb Vaporizer.
2. When you have fully charged the battery, you can turn the Wulf Mods Flora Dry Herb Vaporizer on by pressing the power button five times rapidly.

Note: The power button is the circular button on top of the five OLED indicators. Pressing the power button five times when powered on will cause it to turn off.

Loading the Wulf Mods Flora Dry Herb Vaporizer

1. Prepare your select herbs before using the Wulf Mods Flora Dry Herb Vaporizer. We recommend that you grind your herbs before use.
2. Remove the magnetic mouthpiece by pulling it away from the Wulf Mods Flora Dry Herb Vaporizer base.
3. Load up your dry herbs on the herb chamber.
4. Replace the magnetic mouthpiece onto the body.

Selecting the Wulf Mods Flora Dry Herb Vaporizer Temperature Levels

1. Make sure to fully charge the Wulf Mods Flora Dry Herb Vaporizer.
2. Power the Wulf Mods Flora Dry Herb Vaporizer by pressing the power button five times rapidly.
3. When turned on, press the power button two times to toggle through the available voltage settings.

Wulf Mods Flora Dry Herb Vaporizer Voltage Levels

• 365 Degrees Fahrenheit (One light)
• 374 Degrees Fahrenheit (Two lights)
• 392 Degrees Fahrenheit (Three lights)
• 410 Degrees Fahrenheit (Four lights)
• 428 Degrees Fahrenheit (Five lights)

Note: The Wulf Mods Flora Dry Herb Vaporizer will vibrate to let you know that your selected temperature level has been reached.

Vaping with the Wulf Mods Flora Dry Herb Vaporizer

1. Make sure to fully charge the Wulf Mods Flora Dry Herb Vaporizer.
2. Load the Wulf Mods Flora Dry Herb Vaporizer with your preferred strain of dry herbs.
3. Select your desired temperature level.
4. Allow the Wulf Mods Flora Dry Herb Vaporizer to heat up and reach your selected temperature profile.
5. Inhale the vapors, stir the material from time to time using the included stir tool to prevent the herbs from burning.

Care and Maintenance of the Wulf Mods Flora Dry Herb Vaporizer

1. Make sure to power the Wulf Mods Flora Dry Herb Vaporizer off.
2. Remove the magnetic mouthpiece.
3. Use the included brush to remove any ground material that might be stuck in the herb chamber.
4. Get a dry paper towel or a cloth to clean the Wulf Mods Flora Dry Herb Vaporizer anodized aluminum body.
5. Avoid draining the battery if storing the Wulf Mods Flora Dry Herb Vaporizer for a long time.