Yocan ARI 2.0 Dab Pen Battery Manual

Preparing the Yocan Ari 2.0 Series Dab Pen Battery 

Note: The power button of the Yocan Ari 2.0 Series Dab Pen Battery is located at the upper part of the battery and is the circle shaped button on the vaporizer battery just above the OLED screen.  

1. The first step is to charge your Yocan Ari 2.0 Series Dab Pen Battery. 
2. After charging the battery, continue by powering the Yocan Ari 2.0 Series Dab Pen Battery on by pressing the power button five times.  
3. If you are using a brand new coil for the first time, you can sterilize the coils to ensure that you remove any impurities left during the manufacturing process.  You can sterilize the coils by pressing and holding the power button for three to five seconds two or three times.   
4. After sterilizing the coils, let the vaporizer rest and sit for about two to three minutes. After so, you can begin loading your select concentrates on the Yocan Ari 2.0 Series Dab Pen Battery.  

Charing the Yocan Ari 2.0 Series Dab Pen Battery 

1. Get a USB type-C charging cable and connect it to the charging port, which is found on the side of the vape pen battery.  
2. Plug the other end to power brick and connect it to a wall socket.  
3. The battery level will be reflected on the screen so be sure to unplug the charging cable when the battery is full.  

Note: Alternatively, you may plug the charging cable to a computer, laptop, or a video game console that has a USB port. It can charge the battery at a minimum rate. Just make sure to unplug when the battery is fully charged.  

Changing the Yocan Ari 2.0 Series Dab Pen Battery Voltage Level

1. Make sure the Yocan Ari 2.0 Series Dab Pen Battery is powered on. Press the power button five times to turn it on.  
2. Locate the plus (+) and minus (-) buttons on the side of the device. The + button increases the temperature while the - button decreases the voltage level.  
3. Release the buttons onYocan Ari 2.0 Series Dab Pen Batteryce you have selected your preferred voltage setting and the Yocan Ari 2.0 Series Dab Pen Battery will automatically apply the desired heat level.  

Loading the Yocan Ari 2.0 Series Dab Pen Battery 

Wax:

Note: The Yocan Ari 2.0 Series Dab Pen Battery can be used with wax concentrates. Use a compatible 510-threaded wax coil. When loading, make sure that the dab tool does not touch the coils as contact with another metal may cause the coils to break or get damaged.

1. Get your preferred wax coil.
2. Check the Yocan Ari 2.0 Series Dab Pen Battery 510-threaded connections and look for obstructions that can block the connection between the coil or the battery, remove if necessary. 
3. Connect the 510-threaded wax coil by twisting the coil clockwise, stop when you feel a significant amount of resistance.   
4. If it is the first time you are using your Yocan Ari 2.0 Series Dab Pen Battery, be sure to sanitize it. 
5. Prepare your dab tool and scoop up a recommended amount of wax concentrates. Place it atop the coil.  
6. Replace any necessary accessories onto the coil like a mouthpiece, etc.  

Oil Cartridge: 

Note: The Yocan Ari 2.0 Series Dab Pen Battery can be used with oil cartridges. Use a compatible 510-threaded oil cart. When using a refillable oil cartridge, make sure to refill the cartridge first before placing it on the Yocan Ari 2.0 Series Dab Pen Battery as spillage can cause inconvenience or damage to the battery. 

1. Make sure to fill your refillable carts with oil before connecting it to the Yocan Ari 2.0 Series Dab Pen Battery. Disregard this step if using a pre-filled cart. 
2. Check the Yocan Ari 2.0 Series Dab Pen Battery 510-threaded connections and look for obstructions that can block the connection between the coil or the battery, remove if necessary. 
3. Connect the 510-threaded oil cartridge by twisting it clockwise, stop when you feel a significant amount of resistance.   
4. Replace any necessary accessories onto the cartridge like a mouthpiece, etc.