FREE DOMESTIC SHIPPING FOR ORDERS OVER $50

Vaporizers Chevron
Cartridge Vapes Chevron
Hot Knives
Parts & Accessories Chevron
Deals Chevron
Sub Brands Chevron
Wholesale
Account

Yocan ARI Series Dab Pen Battery Manual

Everything you need to know to get started and make the most of your Yocan ARI Series Dab Pen Battery.

Preparing the Yocan Ari Vaporizer Battery

Note: The power button of the Yocan Ari Vaporizer Battery is located at the upper part of the battery and is the square shaped button on the vaporizer battery that lights up when opened.
  1. The first step is to charge your Yocan Ari Vaporizer Battery.
  2. After charging the battery, continue by powering the Yocan Ari Vaporizer Battery on by pressing the power button five times.
  3. If you are using a brand new coil for the first time, you can sterilize the coils to ensure that you remove any impurities left during the manufacturing process. You can sterilize the coils by pressing and holding the power button for three to five seconds two or three times.
  4. After sterilizing the coils, let the vaporizer rest and sit for about two to three minutes. After so, you can begin loading your select concentrates on the Yocan Ari Vaporizer Battery.

Loading the Yocan Ari Vaporizer Battery

Wax:

Note: The Yocan Ari Vaporizer Battery can be used with wax concentrates. Use a compatible 510-threaded wax coil. When loading, make sure that the dab tool does not touch the coils as contact with another metal may cause the coils to break or get damaged.
  1. Get your preferred wax coil.
  2. Check the Yocan Ari Vaporizer Battery 510-threaded connections and look for obstructions that can block the connection between the coil or the battery, remove if necessary.
  3. Connect the 510-threaded wax coil by twisting the coil clockwise, stop when you feel a significant amount of resistance.
  4. If it’s the first time you’re using your Yocan Ari Vaporizer Battery, be sure to sanitize it first.
  5. Prepare your dab tool and scoop up a recommended amount of wax concentrates. Place it atop the coil.
  6. Replace any necessary accessories onto the coil like a mouthpiece, etc.

Oil Cartridge:

Note: The Yocan Ari Vaporizer Battery can be used with oil cartridges. Use a compatible 510-threaded oil cart. When using a refillable oil cartridge, make sure to refill the cartridge first before placing it on the Yocan Ari Vaporizer Battery as spillage can cause inconvenience or damage to the battery.
  1. Make sure to fill your refillable carts with oil before connecting it to the Yocan Ari Vaporizer Battery. Disregard this step if using a pre-filled cart.
  2. Check the Yocan Ari Vaporizer Battery 510-threaded connections and look for obstructions that can block the connection between the coil or the battery, remove if necessary.
  3. Connect the 510-threaded oil cartridge by twisting it clockwise, stop when you feel a significant amount of resistance.
  4. Replace any necessary accessories onto the cartridge like a mouthpiece, etc.

Vaping with the Yocan Ari Vaporizer Battery

  1. Ensure that your Yocan Ari Vaporizer Battery is completely charged, suitably sterilized, and is loaded with concentrates or oils before you begin your vaping session.
  2. Next, make sure that you have selected your preferred voltage setting.
  3. Then, ensure that the Yocan Ari Vaporizer Battery is loaded and press your lips onto the mouthpiece and prepare to draw or inhale.
  4. Press and hold the power button. When the Yocan Ari Vaporizer Battery starts making vapors inhale from the mouthpiece and check the vapor production.
  5. Repeat this process as necessary or as the concentrates or oils are fully consumed.

Powering the Yocan Ari Vaporizer Battery On and Off

Note: Make sure that the battery is fully charged.
  1. Press the power button five times quickly to turn the Yocan Ari Vaporizer Battery on.
  2. Press the power button five more times to turn the Yocan Ari Vaporizer Battery off.

Changing the Voltage Setting

Note: Make sure that the Yocan Ari Vaporizer Battery is powered on before changing the voltage setting.
  1. Locate the bottom part of the battery and find the variable voltage levels.
  2. Twist the knob and select your preferred voltage setting.

Care and Maintenance of the Yocan Ari Vaporizer Battery

The Yocan Ari Vaporizer Battery was made with few parts which makes it easy to clean and to maintain. Likewise, having fewer parts to work with makes your vaporizer more robust and more durable. To keep your Yocan Ari Vaporizer Battery clean and in good working condition, follow the steps below.

  1. Tap the power button five times to power the Yocan Ari Vaporizer Battery on. Five more clicks will turn the Yocan Ari Vaporizer Battery off. Do this to ensure that the battery is turned off.
  2. If you have a wax coil connected, you may turn the Yocan Ari Vaporizer Battery upside down.
  3. Conduct a burn-off by pressing and holding the power button for five seconds. Repeat this process two to three times. Doing so will melt any residue making the cleaning process easy.
  4. Let the vaporizer cool down.
  5. Dismantle the Yocan Ari Vaporizer Battery by unscrewing the 510-threaded wax coil or oil cartridge counter clockwise. With the 510-threaded links exposed, you can use a cotton swab to clean it off before storing or replacing a coil or cartridge.
  6. Remove any oily residue on the battery using a dry paper towel and proceed with reassembling the Yocan Ari Vaporizer Battery.
View product >