Vaporizers Chevron
Cartridge Vapes Chevron
Hot Knives
Parts & Accessories Chevron
Deals Chevron
Sub Brands Chevron
Wholesale
Account

Yocan Armor Battery Manual

Everything you need to know to get started and make the most of your Yocan Armor Battery.

Recharging the Yocan Armor Battery:

  1. Make sure to turn the Yocan Armor Battery off before charging by pressing the power button five times quickly.
  2. Take the USB charging cable and connect it to a wall adapter.
  3. Connect the wall adapter + USB charger combo and plug it on a wall adapter.
  4. Connect the micro USB tip to the Yocan Armor Battery slot.

Note: the Yocan Armor Battery is outfitted with a 380mAh battery that takes as fast as 30 minutes to charge.

Using the Yocan Armor Battery:

  1. With a fully charged battery, turn the device on by pressing the power button five times quickly.
  2. Press the power button and hold it down to activate the heating element.
  3. Let the button go to stop heating.

Changing the Temperature Settings:

  1. Make sure that the battery is powered on by pressing the power button five times rapidly.
  2. Once the battery is powered on, press the power button three times rapidly.
  3. Release the power button once you’ve selected your preferred temperature setting.

Note: The temperature settings are represented by an LED light system. They are as follow; 1 light – 3.0 volts, 2 lights – 3.5 volts, 3 lights – 4.0 volts.

Activating the 10-Second Pre-Heat Function:

  1. Power the battery on by clicking on the power button five times quickly.
  2. Press the power button twice to activate pre-heat mode.
  3. Press the power button twice again to deactivate pre-heat mode.

Note: The pre-heat mode will last for 10 seconds and will cause the coils to heat at a very low temperature setting.

Cleaning the Yocan Armor Battery:

  1. Turn the Yocan Armor Battery off by pressing the power button five times rapidly.
  2. Use a cotton swab to clean the contacts of the battery.
  3. Get a moistened paper towel or an alcohol wipe to clean the surface of the battery.
  4. Use dry paper towel or a clean dry cloth to wipe the surface of the battery.

Note: Avoid using any soaked cleaning materials as it can cause irreversible water damage. Only use dampened cleaning materials to avoid any form of liquid entering the interior of the Yocan Armor Battery.

 

View product >