Yocan Armor Plus Vaporizer Manual

Preparing the Yocan Armor Plus Vaporizer:

1. Make sure that you have fully charged the Yocan Armor Plus Vaporizer battery before using it for best results.
2. After securing a fully charged battery, press the power button five times quickly to turn on the Yocan Armor Plus Vaporizer.

Note: The power button is the triangular button located right below the LED light indicator. It has a glossy finish as opposed to the matte finish on the battery’s housing.

Loading the Yocan Armor Plus Vaporizer:

1. Prepare your select wax concentrates. Set your extracts on the table together with the dab tool.
2. Remove the Yocan Armor Plus Vaporizer’s mouthpiece by unscrewing it from the atomizer base.
3. Unscrew the coil cap to access the coil.
4. Use your dab tool to scoop up your desired amount of wax concentrates and place it atop your choice of QDC or QTC.
5. Replace the coil cap and screw it clockwise.
6. Replace the mouthpiece by twisting it back in place.

Changing the Yocan Armor Plus Vaporizer Coils:

1. Unscrew the mouthpiece by twisting it counterclockwise from the atomizer base.
2. Remove the coil installed on the atomizer base by twisting it in the same counterclockwise motion.
3. Get your choice of QDC or QTC and connect it to the atomizer base by twisting it clockwise.
4. Replace the mouthpiece by screwing it back in place.
5. Vaping with the Yocan Armor Plus Vaporizer:
6. Make sure that you’ve fully charged the battery, installed your select atomizer coil, and loaded the Yocan Armor Plus Vaporizer with your choice extracts.
7. Press the power button five times quickly to activate the battery.
8. Press and hold the power button to vaporize your wax concentrates.
9. Repeat this process as necessary or until the extracts in the atomizer is consumed.

Selecting the Temperature Settings:

1. Make sure that the battery is powered on.
2. Press the power button three times quickly to toggle through the preset temperature settings.

Care and Maintenance of the Yocan Armor Plus Vaporizer:

The Yocan Armor Plus Vaporizer is made with few parts making it a device that’s relatively easy to take care of. Follow the steps below on how you can clean and take care of your Yocan Armor Plus Vaporizer.

1. Wipe off any dirt or residue on the Yocan Armor Plus Vaporizer battery using a dry paper towel or some alcohol wipes. Continue to reassemble the Yocan Armor Plus Vaporizer.
2. Follow the charging instructions and use the dedicated charging cable to prolong the Yocan Armor Plus Vaporizer’s battery life.