Yocan Armor Ultimate Portable Vaporizer Pen for Concentrate Manual

Preparing the Yocan Armor Vaporizer

1. Make sure that you fully charge the Yocan Armor Vaporizer before use.
2. Once you have secured a fully charged battery, turn the vaporizer on by pressing the power button 5 times in two seconds.

Note: The power button is the triangular button located at the middle part of the battery just right above the Yocan branding.

Loading the Yocan Armor Vaporizer

1. Prepare your wax concentrates, use the inclusive dab tool to scoop up your extracts when loading the Yocan Armor Vaporizer.
2. Open the chamber by removing the mouthpiece from the battery. Carefully twist the mouthpiece counterclockwise to unscrew it from the battery.
3. Carefully twist the coil caps and unscrew it from the coil.
4. Load your wax concentrates to the coil using the dab tool.
5. Replace the coil cap.
6. Replace the mouthpiece by screwing it back to the threaded connection of the battery.

Note: Avoid touching the coils with the dab tool as it may get damaged if the coils are bumped out of place. Carefully place the wax concentrates above the quartz rods without touching the metal coils. Leftover wax on the dab tool can be scraped on the sides of the QDC.

Vaping with the Yocan Armor Vaporizer

1. Make sure that the Yocan Armor Vaporizer is fully charged and is loaded with your select wax concentrates before you start vaping.
2. After you have loaded the Yocan Armor Vaporizer, press your lips near the mouthpiece and prepare to inhale.
3. Press and hold the power button of the Yocan Armor Vaporizer and once the Yocan Armor Vaporizer creates vapors pull and draw from the mouthpiece.
4. Repeat this process after the extracts are fully vaporized or you may stop after a full cycle.

Care and Maintenance of the Yocan Armor Vaporizer

The Yocan Armor Vaporizer is made with few parts which make it a solid device and is likewise easy to clean and maintain. The Yocan Armor Vaporizer is a wax concentrate vaporizer and requires only a few steps to clean. To clean your Yocan Armor Vaporizer, follow the steps below.

1. Wipe-off any residue on the battery with a dry paper towel and continue to reassemble the Yocan Armor Vaporizer.
2. Make sure to follow charging instructions and use the dedicated charger to avoid damaging the Yocan Armor battery.