Yocan Arsenal Evolve Plus Vaporizer Manual

Preparing the Yocan Arsenal Evolve Plus Vaporizer

1. Make sure that you achieve a full charge on the Yocan Arsenal Evolve Plus Vaporizer before use for optimum results.
2. Once you have a full charge, turn on the Yocan Arsenal Evolve Plus Vaporizer battery by clicking the power button 5 times consecutively. Note: The power button is located at the middle part of the battery facing outwards just above the Yocan Arsenal Evolve Plus logo.
3. Once the Yocan Arsenal Evolve Plus Vaporizer is powered on you can sterilize the heating element by pressing and holding the power button for 5 seconds 2 – 3 times. Note: perform sterilization during the first time you receive your Yocan Arsenal Evolve Plus Vaporizer. This will eliminate and get rid of any impurities that might have made its way to the heating chamber during the manufacturing process.
4. Once you’re finished with sterilization, you can let the vaporizer sit and cool down for about 2 – 3 minutes. As soon as it’s finished cooling, you can now load your select concentrates to your Yocan Arsenal Evolve Plus Vaporizer.

Loading the Yocan Arsenal Evolve Plus Vaporizer

1. Set your select wax concentrates on a piece of parchment paper or any container where you can safely scoop or pick your concentrates upon loading. Make sure to use the included heavy dab tool from the Yocan Arsenal Evolve Plus Vaporizer.
2. Make sure to prepare your Yocan Arsenal Evolve Plus Vaporizer first, especially if it’s the first time you’re using it. Note: Follow steps for preparing the Yocan Arsenal Evolve Plus Vaporizer.
3. Turn the mouthpiece sideways to reveal the Yocan Quartz Dual Coils (QDC).
4. Load desired amount of concentrate onto the Yocan coil. Note: Make sure that the dab tool does not touch the coils as contact with another metal may cause the coils to break or get damaged. Simply drop the concentrates atop the QDC.
5. Move the mouthpiece back sideways to replace it back to its original position.

Vaping with the Yocan Arsenal Evolve Plus Vaporizer

1. Make sure that the Yocan Arsenal Evolve Plus Vaporizer is properly sterilized, fully charged, and is loaded with your concentrates before vaping.
2. As soon as it’s loaded, take the mouthpiece and press it against your lips. Afterwards, prepare to draw.
3. Press and hold the power button at the same time as the Yocan Arsenal Evolve Plus Vaporizer starts generating vapors, pull and inhale from the vaporizer mouthpiece.
4. Repeat this process as necessary or as the concentrates are fully consumed.

Care and Maintenance of the Yocan Arsenal Evolve Plus Vaporizer

The Yocan Arsenal Evolve Plus Vaporizer has few moving parts which make it a firm and rigid device. Having fewer parts to work with also makes the Yocan Arsenal Evolve Plus Vaporizer easy to clean and maintain. To clean your Yocan Arsenal Evolve Plus Vaporizer, follow below steps.

1. Power your vaporizer on. Five clicks to turn it on and five clicks to turn it off.
2. Position the Yocan Arsenal Evolve Plus Vaporizer upside down.
3. Execute a burn-off by pressing and holding the power button for 5 seconds. Replicate this process 2 – 3 times. This will make any waxy residue to melt or evaporate.
4. Let the heating element cool down.
5. Wipe off the vaporizer and the parts with a dry paper towel.