Yocan Black Case Cartridge Battery Manual

Charging the Yocan Black Case Cartridge Battery

1. Take the USB type-C charging cable included in the box.
2. Connect it to the Yocan Black Case Cartridge Battery.
3. Find a compatible wall adapter or wall charger.
4. Plug the wall adapter to a wall socket.

Note: Make sure to use a compatible wall adapter and a charging cable when charging the Yocan Black Case Cartridge Battery. If you can’t find a wall adapter, you can plug the Yocan Black Case Cartridge Battery on your computer or your video game console.

Preparing the Yocan Black Case Cartridge Battery

1. Make sure to fully charge the Yocan Black Case Cartridge Battery.
2. When you have fully charged the battery, you can power on the Yocan Black Case Cartridge Battery by pressing the power button five times rapidly.

Note: Pressing the power button five times when powered on will cause it to turn off. The power button is located on the middle of the battery at the backside of the Yocan Black Case Cartridge Battery.

Loading the Yocan Black Case Cartridge Battery

1. Take your pre-filled cartridge out of the packaging.
2. Connect the 510-threaded magnetic adapter to the cartridge.
3. Slide the cartridge to the base and wait for the magnets to snap back together.
4. If you are using a refillable cartridge, open the Yocan Black Case Cartridge Battery.
5. Load your preferred oil in the cart.
6. Slide the cartridge to the base and wait for the magnets to snap back together.
7. Close the Yocan Black Case Cartridge Battery in place.

Changing the Yocan Black Case Cartridge Battery’s Voltage Level

1. Make sure to fully charge the Yocan Black Case Cartridge Battery.
2. Turn the Yocan Black Case Cartridge Battery on by pressing the power button five times quickly.
3. When powered on, press the power button three times to change the temperature setting.
4. Let go of the power button.

Note: Letting go of the power button allows the Yocan Black Case Cartridge Battery to lock in your preferred temperature level and will activate it automatically. Allow one to two seconds for this action to happen.

Yocan Black Case Cartridge Battery Temperature Levels

1. 1.8 volts
2. 2.6 volts
3. 3.4 volts
4. 4.2 volts

Activating the Pre-Heat Setting for Yocan Black Case Cartridge Battery

1. Power the Yocan Black Case Cartridge Battery on by pressing the power button five times rapidly.
2. Press the power button twice to activate pre-heat setting.
3. Press the power button for two more times to deactivate pre-heat mode.

Care and Maintenance for Yocan Black Case Cartridge Battery

1. Make sure to power the Yocan Black Case Cartridge Battery off.
2. Remove the cartridge and either clean it or replace it.
3. Get a dry paper towel or a cloth to clean the Yocan Black Case Cartridge Battery body.
4. Allow the parts to dry out before assembling them back together.
5. Avoid draining the battery if storing the Yocan Black Case Cartridge Battery for a long time.
6. Use the provided case for the Yocan Black Case Cartridge Battery for improved protection when using the cartridge battery when travelling.