Yocan Black GO Vaporizer Manual

Charging the Yocan Black Go Vaporizer

1. Make sure to use the USB type-C charging cable included in the Yocan Black Go Vaporizer packaging.
2. Connect the USB charging cable to a wall adapter and plug the wall adapter to a wall outlet.
3. Take the other end of the charging cable and connect it to the Yocan Black Go Vaporizer.

Note: You can connect the charging cable to your computer or any compatible USB port to charge the Yocan Black Go Vaporizer. The changing port is located at the bottom part of the power button.

Turning the Yocan Black Go Vaporizer On

1. Make sure to fully charge the Yocan Black Go Vaporizer for best results.
2. Press the power button of the Yocan Black Go Vaporizer five times quickly to power it on.
3. Press the same power button for another five times to power the Yocan Black Go Vaporizer off.

Note: The power button is located at the front of the Yocan Black Go Vaporizer. It is the circular button and sits in between the Insight Screen and the aforementioned charging port.

Loading the Yocan Black Go Vaporizer

1. Remove the mouthpiece of the Yocan Black Go Vaporizer.
2. With coil exposed, simply drop a dollop of wax concentrates onto the Cloud2 Chamber.
3. Replace the mouthpiece of the Yocan Black Go Vaporizer.

Selecting the Temperature Level for the Yocan Black Go Vaporizer

1. Make sure that the Yocan Black Go Vaporizer is powered on.
2. Select your preferred temperature level by toggling the joystick controller left or right.
3. Release the controller when you have decided on the temperature level you want.

Note: The Yocan Black Go Vaporizer has a temperature range of 440 degrees Fahrenheit to 660 degrees Fahrenheit or 226 degrees Celsius to 348 degrees Celsius.

Replacing the water of the Yocan Black Go Vaporizer

1. Remove the top part of the Yocan Black Go Vaporizer.
2. Remove the water in the glass bubbler.
3. Replace the water to desired amount. 
4. Replace the top part of the Yocan Black Go Vaporizer.

Replacing the coil of the Yocan Black Go Vaporizer

1. Remove the top part of the Yocan Black Go Vaporizer.
2. Make sure that the coil has cooled down.
3. Untwist the coils from the 510-threaded link.
4. Take the new Cloud2 Chamber and twist it onto the 510-threaded connector.
5. Replace the top part of the Yocan Black Go Vaporizer.

Note: Remove the coil by twisting it counterclockwise. When tightening the coil and twisting it clockwise, avoid applying too much pressure when you feel resistwotance. Overtightening the coil might cause the threaded links to become loose.

Maintenance and cleaning of the Yocan Black Go Vaporizer

1. Make sure to remove the coil of the Yocan Black Go Vaporizer.
2. Turn off the Yocan Black Go Vaporizer by pressing the power button five times rapidly.
3. Take a cotton swab and wipe the coil contacts clean.
4. Use a dry paper towel and wipe the body of the Yocan Black Go Vaporizer clean. Do the same for the glass bubbler and avoid storing it moist.
5. Follow the charging instruction and use the dedicated charging cable for the Yocan Black Go Vaporizer to avoid battery damage.
6. Make sure to charge the Yocan Black Go Vaporizer before storing it too long.

Note: Make sure to keep the parts dry before storing as it may cause mold buildup and may have negative effects if used with molds. Use a dry paper towel or paper cloth after wiping the parts with a damp material.