Yocan Black Phaser Max E-Rig Manual

Charging the Yocan Black Phaser Max E-Rig

1. Make sure to use the four-feet USB type-C charging cable included in the Yocan Black Phaser Max E-Rig packaging.
2. Connect the USB charging cable to a wall adapter and plug the wall adapter to a wall outlet.
3. Take the other end of the charging cable and connect it to the Yocan Black Phaser Max E-Rig.

Note: You can connect the charging cable to your computer or any compatible USB port to charge the Yocan Black Phaser Max E-Rig. Alternatively, you can charge the Yocan Black Phaser Max E-Rig wirelessly.

Turning the Yocan Black Phaser Max E-Rig On

1. Make sure to fully charge the Yocan Black Phaser Max E-Rig for best results.
2. Press the power button of the Yocan Black Phaser Max E-Rig five times quickly to power it on.
3. Press the same power button for another five times to power the Yocan Black Phaser Max E-Rig off.

Note: The power button is located at the front of the Yocan Black Phaser Max E-Rig. It is the circular trigger-like button.

Loading the Yocan Black Phaser Max E-Rig

1. Remove the coil cap of the Yocan Black Phaser Max E-Rig.
2. With coil exposed, simply drop a dollop of wax concentrates onto the Advanced Dual Coil System atomizer.
3. Replace the coil cap of the Yocan Black Phaser Max E-Rig.
4. Selecting the Temperature Level for the Yocan Black Phaser Max E-Rig
5. Make sure that the Yocan Black Phaser Max E-Rig is powered on.
6. Select your preferred temperature level by pressing the “+” and “-” button on the user facing side of the Yocan Black Phaser Max E-Rig.
7. Release the buttons when you have decided on the temperature level you want.

Note: The Yocan Black Phaser Max E-Rig has a temperature range of 400 degrees Fahrenheit to 700 degrees Fahrenheit.

Maintenance and cleaning of the Yocan Black Phaser Max E-Rig

1. Make sure to remove the coil of the Yocan Black Phaser Max E-Rig.
2. Turn off the Yocan Black Phaser Max E-Rig by pressing the power button five times rapidly.
3. Take a cotton swab and wipe the coil contacts clean.
4. Use a dry paper towel and wipe the body of the Yocan Black Phaser Max E-Rig clean.
5. You may soak the glass bubbler in lukewarm water before brushing the glass for best result.
6. Follow the charging instruction and use the dedicated charging cable for the Yocan
7. Black Phaser Max E-Rig to avoid battery damage.
8. Make sure to charge the Yocan Black Phaser Max E-Rig before storing it too long.