Yocan Blade Dabbing Knife Manual
Charging the Yocan Blade Dabbing Knife
- Take the USB type-C cable included in the packaging of the Yocan Blade Dabbing Knife.
- Get a compatible wall adapter and plug the charging cable and brick onto a wall outlet.
- Plug the charging cable onto the charging port of the Yocan Blade Dabbing Knife.
Note: You can also charge the Yocan Blade Dabbing Knife using your computer.
Turning the Yocan Blade Dabbing Knife On
- Make sure that the Yocan Blade Dabbing Knife is fully charged when you use it.
- Press the power button five times to turn the Yocan Blade Dabbing Knife on.
- Press the power button five more times when turned on to power the Yocan Blade Dabbing Knife off.
Changing the Ceramic Heating Tip of the Yocan Blade Dabbing Knife
- Make sure to turn the Yocan Blade Dabbing Knife off.
- When cooled down, remove the ceramic heating tip by simply pulling it away from the battery.
- Take the new ceramic heating tip and allow the magnets to lock securely in place.
Changing the Voltage Level of the Yocan Blade Dabbing Knife
- Make sure that the Yocan Blade Dabbing Knife is powered on.
- Press the power button three times to change the voltage level.
Yocan Blade Dabbing Knife Voltage Levels
- 3.0 volts – Blue
- 3.6 volts – Green
- 4.2 volts – Red
Maintenance and cleaning of the Yocan Blade Dabbing Knife
- Turn on the Yocan Blade Dabbing Knife by pressing the power button five times rapidly.
- Perform a burn-off by activating the heating element for two to three seconds several times.
- Use a dry paper towel and wipe the body of the Yocan Blade Dabbing Knife clean.
- Follow the charging instruction and use the dedicated charging cable for the Yocan Blade Dabbing Knife to avoid battery damage.
- Make sure to charge the Yocan Blade Dabbing Knife before storing it too long.