Yocan Cubex Vaporizer Manual

Preparing the Yocan Cubex Vaporizer

Note: The power button is located at the middle part of the battery facing outwards and is the square shaped / elongated button on the vaporizer battery. Perform sterilization during the first time you receive your Yocan Cubex Vaporizer. This will eliminate and get rid of any impurities that might have made its way to the heating chamber during the manufacturing process.

1. The first step is to charge your Yocan Cubex Vaporizer before use.
2. After charging the battery, continue by powering the Yocan Cubex Vaporizer on by pressing the power button five times.
3. Once the Yocan Cubex Vaporizer is powered on you can begin the sterilization process. You can sterilize the coils by pressing and holding the power button for five seconds two or three times.
4. After sterilizing the coils, let the vaporizer rest and sit for about two to three minutes. After so, you can begin loading your select concentrates on the Yocan Cubex Vaporizer.

Loading the Yocan Cubex Vaporizer

1. If it’s the first time you’re using your Yocan Cubex Vaporizer, be sure to sterilize it first.
2. Remove the mouthpiece to expose the coils. The magnetic mouthpiece needs to be pulled away from the body in order to be removed.
3. The coil will be sealed with a coil cap. Remove it by twisting the coil cap counterclockwise.
4. Load the desired amount of concentrate onto the coil.
5. Replace the coil cap.
6. Replace the mouthpiece.

Vaping with the Yocan Cubex Vaporizer

1. Ensure that the Yocan Cubex Vaporizer is completely charged, sterilized, and is loaded with concentrates before you begin your vaping session.
2. Next, place your lips onto the mouthpiece and prepare to draw or inhale.
3. Press and hold the power button. When the Yocan Cubex Vaporizer starts making vapors inhale from the mouthpiece.
4. Repeat this process as necessary or as the concentrates or herbs are fully consumed.

Care and Maintenance of the Yocan Cubex Vaporizer

The Yocan Cubex Vaporizer was made with few parts which makes it easy to clean and to maintain. Likewise, having fewer parts to work with makes your vaporizer more robust and more durable. To keep your Yocan Cubex Vaporizer clean and in good working condition, follow the steps below.

1. Tap the power button five times to power the Yocan Cubex Vaporizer on. Five more clicks will turn the Yocan Cubex Vaporizer off.
2. Turn the Yocan Cubex Vaporizer upside down.
3. Conduct a burn-off by pressing and holding the power button for three to five seconds. Repeat this process two to three times. Doing so will melt any residue making the cleaning process easy.
4. Let the Yocan Cubex Vaporizer cool down.
5. Dismantle the Yocan Cubex Vaporizer by pulling the magnetic connections and by twisting the threaded connections counter clockwise.
6. Remove any liquid residue on the vaporizer using a dry paper towel or a cotton swab.
7. Proceed with reassembling the Yocan Cubex Vaporizer.