Yocan Dyno Nectar Collector Vaporizer Manual

Charging the Yocan Dyno Nectar Collector Vaporizer

1. Take a USB Type-C charging cable and connect it to the port located at the bottom or base of the Yocan Dyno Nectar Collector Vaporizer.
2. Take the other end of the charging cable and connect it to a power brick, and then plug it into a wall socket.

Note: The charging port is close to the ceramic heating tip at the bottom of the device, opposite the glass bubbler. Alternatively, you may connect the charging cable to a desktop, laptop, or a compatible game console to recharge the Yocan Dyno Nectar Collector Vaporizer.

Preparing the Yocan Dyno Nectar Collector Vaporizer

1. Make sure to fully charge the Yocan Dyno Nectar Collector Vaporizer to get the best results.
2. After making sure that the battery is fully charged, hit the power button five times quickly to turn on the Yocan Dyno Nectar Collector Vaporizer.

Note: The power button is the circular button located right above the ceramic heating element. The placement of the power button allows for easy activation when dabbing with the Yocan Dyno Nectar Collector Vaporizer.

Loading the Yocan Dyno Nectar Collector Vaporizer

1. Prepare your wax concentrates. Place them in a separate wax jar if you are microdosing or you place them in a dab mat.
2. Remove the glass cover by pulling it away from the magnetic atomizer base.
3. You may then dab the ceramic heating element directly onto the wax concentrate or you may scoop a dollop of wax using a dab tool and dab from the dab tool itself.
4. Once done, you may replace the mouthpiece by sliding it back in pace and waiting for the magnetic links to lock in place.

Note: Avoid removing the mouthpiece or the coil while the said parts are still hot. It can affect the integrity of the components and it might cause minor burns on your finger.

Removing the Ceramic Tip of the Yocan Dyno Nectar Collector Vaporizer

1. Make sure that the Yocan Dyno Nectar Collector Vaporizer is powered off and has cooled down.
2. Remove the glass cover.
3. Since both the glass cover and the ceramic tip use magnets, you can simply pull out the heating element from the base.
4. Take a brand-new coil (replacement coils to be sold separately) and slide it back in place.
5. Place the glass tip cover back on top of the base.

Note: The Yocan Dyno Nectar Collector Vaporizer does not come with an extra ceramic tip. You may purchase a replacement part if you deem that the heating element is already worn out.

Vaping with the Yocan Dyno Nectar Collector Vaporizer

1. Make sure that you have fully charged the battery of the Yocan Dyno Nectar Collector Vaporizer, installed your ceramic heating tip correctly, and have prepared your preferred wax concentrates.
2. Press the power button five times quickly to activate the battery.
3. Press and hold the power button to vaporize your wax concentrates.
4. Repeat this process as necessary or until the extracts in your wax jar or dab mat are consumed.

Changing the voltage level of the Yocan Dyno Nectar Collector Vaporizer

1. Make sure that the Yocan Dyno Nectar Collector Vaporizer is powered on, press the power button five times quickly if it is still powered off.
2. Press the “+” to increase the temperature level. Doing so will allow it to produce more vapor that is more potent.
3. Press the “-” to decrease the temperature level. Doing so will allow it to produce thinner vapor that is more flavorful.
4. Once you have selected your preferred temperature level, leave the buttons and the device will automatically read your selection.

Yocan Dyno Nectar Collector Vaporizer Voltage Range

• From 2.0 volts to 4.2 volts

Care and Maintenance of the Yocan Dyno Nectar Collector Vaporizer

The Yocan Dyno Nectar Collector Vaporizer is made with relatively few parts making it a device that’s easy to take care of. Follow the steps below on how you can clean and take care of your Yocan Dyno Nectar Collector Vaporizer.

1. Wipe off any dirt or residue on the Yocan Dyno Nectar Collector Vaporizer battery using a dry paper towel or some alcohol wipes. Continue to reassemble the vaporizer.
2. Follow the charging instructions and use the dedicated charging cable to prolong the Yocan Dyno Nectar Collector Vaporizer.
3. For maintaining the coils, make sure to refrain from using any hard objects to tamper with the heating element. In the event of a damaged coil, remove it and replace it with a new one immediately.