Yocan Evolve 3 in 1 Vaporizer Manual

Preparing the Yocan Evolve 3-in1- Vaporizer

1. Make sure that you charge the Yocan Evolve 3-in-1 Vaporizer before use.
2. Once you have secured a full charge, turn on the vaporizer battery by clicking the power button 5 times. Note: The power button is located at the middle part of the battery facing outwards just right above the Evolve logo.
3. Once the Yocan Evolve 3-in-1 Vaporizer is turned on you can sterilize the herb and the concentrate heating element by pressing and holding the same power button for 5 seconds two or three consecutive times. Note: perform sterilization during the first time you receive your Yocan Evolve 3-in-1 Vaporizer. This will eliminate and get rid of any impurities that might have made its way to the heating chamber during the manufacturing process.
4. Once you’re done with sterilization, you can let the vaporizer sit and rest for about 2 – 3 minutes. After which, you can now load your select concentrates to your Yocan Evolve 3-in-1 Vaporizer.

Loading the Yocan Evolve 3-in-1 Vaporizer Concentrate Atomizer

1. Place your concentrates on a container where you can easily pick or scoop up your waxy concentrate materials upon loading.
2. Make sure you’ve prepared your Yocan Evolve 3-in-1 Vaporizer first especially if it’s the first time you’re using it. Note: Follow steps for preparing the Yocan Evolve 3-in-1 Vaporizer.
3. Turn the mouthpiece counterclockwise to reveal the Yocan Quartz Dual Coils (QDC).
4. Remove the coil cap by twisting it counter clockwise. Removing the mouthpiece exposes the coils that are covered with the coil cap.
5. Load desired amount of concentrate onto the coil. Note: Make sure that the dab tool does not touch the coils as contact with another metal may cause the coils to break or get damaged. Simply drop the concentrates atop the QDC.
6. Replace the coil cap and tighten it by turning it clockwise.
7. Perform the same action to replace the mouthpiece. Note: make sure that you do not overtighten the threads as it may damage it and cause it to be loose altogether.

Loading the Yocan Evolve 3-in-1 Vaporizer E-Liquid Atomizer

1. Set your e-liquids aside.
2. Unscrew the metallic cover to access the concentrate atomizer.
3. Once the metallic cover has been removed, hold the e-liquid chamber and twist it counterclockwise to remove it.
4. Unscrew the lid of the e-liquid atomizer chamber to access the filling hole.
5. Load your desired amount of e-liquid onto the coil. Note: Make sure not to overfill the e-liquid atomizer chamber as it may result to spillage.
6. Replace the lid by screwing it back. Note: make sure that you do not overtighten the threads as it may damage it and cause it to be loose altogether.
7. Replace the e-liquid atomizer to the battery by connecting the 510-threaded connections and tightening it by turning it clockwise.

Loading the Yocan Evolve 3-in-1 Vaporizer Dry Herb Atomizer

1. Prepare your dry herb strains. You can use a grinder to grind the herbs into smaller pieces which will allow more of the shredded materials to touch and make contact with the pancake style coils. 
2. Turn the mouthpiece counterclockwise to reveal the dual pancake style coils. 
3. Load desired amount of ground herbs onto the heating chamber. Note: Make sure to allow enough room for air to make its way from the heating element to the mouthpiece. Packing your herbs tight may cause a similarly tight airflow and you may have a hard time inhaling vapors from the Yocan Evolve 3-in-1 Vaporizer.
4. Replace the mouthpiece by twisting the threaded connections clockwise. Note: make sure that you do not overtighten the threads as it may damage it and cause it to be loose altogether.

Vaping with the Yocan Evolve 3-in-1 Vaporizer

1. Make sure that the Yocan Evolve 3-in-1 Vaporizer is properly sterilized, properly charged, and is loaded with the appropriate type of material using the correct atomizer before vaping.
2. Once loaded, take the mouthpiece and hold it close to your lips, prepare to draw.
3. Press and hold the power button at the same time and as the Yocan Evolve 3-in-1 Vaporizer begins producing vapors, inhale and pull from the vaporizer.
4. Repeat this process as necessary or as the materials are fully consumed.

Care and Maintenance of the Yocan Evolve 3-in-1 Vaporizer

The Yocan Evolve 3-in-1 Vaporizer has significantly more parts which make it a versatile device but is otherwise easy to clean and maintain. To clean your Yocan Evolve 3-in-1 Vaporizer, follow the steps below.

1. Turn the vaporizer on. Five clicks will turn it on and five clicks turns it off.
2. Turn the vaporizer upside down.
3. Perform a burn-off by pressing and holding the power button for 5 seconds. Repeat this process 2 – 3 times. This will cause any residue to melt or evaporate.
4. Let the vaporizer cool down.
5. Disassemble the vaporizer by turning the threaded connections counter clockwise.
6. Turn the vaporizer off.
7. Remove the mouthpiece to gain access the herb chamber.
8. Take the included cleaning brush and gently brush the dual coils.
9. Replace the mouthpiece.
10. Wipe off the vaporizer and the parts with a dry paper towel and reassemble.