Yocan Evolve-D Vaporizer Manual

Preparing the Yocan Evolve-D Vaporizer

1. Make sure to fully charge your Yocan Evolve-D Vaporizer before use for best results.
2. Once you’ve managed to secure a full charge, turn on the vaporizer battery by clicking the power button 5 times. Note: The power button is located at the middle part of the battery facing outwards just below the Yocan logo and above the Evolve logo.
3. Prime the coils by pressing the power button for 3 to 5 seconds. Note: Priming you coils will eliminate and get rid of any impurities that might have made its way to the heating chamber during the manufacturing process. Perform this step especially if it’s the first time you’re using your Yocan Evolve-D Vaporizer.

Loading the Yocan Evolve-D Vaporizer

1. First, prepare your fresh dry herb strains. For best results, use a grinder to grind the herbs into smaller pieces which will allow more of the shredded materials to touch and make contact with the heated surface area.
2. Turn the mouthpiece counterclockwise to reveal the dual pancake style coils on the Yocan Evolve-D Vaporizer.
3. Load desired amount of ground herbs onto the heating chamber. You can use an herb tool to scoop the ground materials or you may transfer the herbs directly from the grinder to the herb chamber. Note: Make sure to allow enough room for air to make its way from the heating element to the mouthpiece. Packing your herbs tight may cause a similarly tight airflow and you may have a hard time inhaling vapors from the Yocan Evolve-D Vaporizer.
4. Replace the mouthpiece by twisting the threaded connections clockwise. Note: make sure that you do not overtighten the threads as it may damage it and cause it to be loose altogether.

Vaping with the Yocan Evolve-D Vaporizer

1. Make sure that the Yocan Evolve-D Vaporizer is fully charged and is properly loaded with ground botanicals before vaping.
2. Once loaded, take the mouthpiece, hold it close to your lips and prepare to inhale once the Yocan Evolve-D Vaporizer is ready.
3. Press and hold the power button to activate the heating element. After the Yocan Evolve-D Vaporizer starts making vapors, draw and pull from the vaporizer mouthpiece. Note: The Yocan Evolve-D Vaporizer has a functional mouthpiece that acts as a tamping tool to press the herbs closer to the heating element while you’re vaping.
4. Repeat this process as necessary or as the ground herbs are fully consumed.

Care and Maintenance of the Yocan Evolve-D Vaporizer

Your Yocan Evolve-D Vaporizer is made with only few parts. This design and engineering make the Yocan Evolve-D Vaporizer a solid device. Its straightforward construction also makes it a vaporizer that is easy to clean and maintain. To keep your Yocan Evolve-D Vaporizer in good working condition, follow the steps below.

1. Turn the vaporizer off. Tapping the power button on the vaporizer five times rapidly will turn it on, tapping it 5 more times once the vaporizer is on will turn it off consequently.
2. Remove the mouthpiece to gain access the herb chamber.
3. Take the included cleaning brush and lightly brush the heating chamber.
4. Replace the mouthpiece.