Yocan Evolve Plus 2 in 1 Vaporizer Manual

Preparing the Yocan Evolve Plus 2-in-1 Vaporizer

1. Ensure that the Yocan Evolve Plus 2-in-1 Vaporizer is fully charged before use to achieve best results.
2. Once you have secured a full charge, power on the vaporizer battery. Click the power button 5 times rapidly to power it on. Note: The power button is the rectangular buttono located at the middle part of the battery facing outwards just above the Evolve Plus logo.
3. Once the Yocan Evolve Plus 2-in-1 Vaporizer is powered on you can start sterilizing the heating element. Press and hold the same power button for 5 seconds two or three times. Note: perform sterilization during the first time you receive your Yocan Evolve Plus 2-in-1 Vaporizer. This will eliminate and get rid of any impurities that might have made its way to the heating chamber during the manufacturing process.
4. Once you’re finished with the sterilization process, you can let the vaporizer sit and rest for about 2 – 3 minutes. After which, you can now load your select concentrates to your Yocan Evolve Plus 2-in-1 Vaporizer.

Loading the Yocan Evolve Plus 2-in-1 Vaporizer Wax Concentrate Atomizer

1. Set your concentrates on a parchment paper, a jar, or by using the integrated wax concentrate container located at the bottom of the Yocan Evolve Plus 2-in-1 Vaporizer.
2. Make sure you’ve prepared your Yocan Evolve Plus 2-in-1 Vaporizer especially first if it’s the first time you’re using it. Note: Follow steps for preparing the Yocan Evolve Plus 2-in-1 Vaporizer.
3. Wind the mouthpiece counter clockwise to expose the Yocan Quartz Dual Coils (QDC).
4. Remove the coil cap by winding it counter clockwise. Removing the mouthpiece exposes the coils that are covered with the coil cap.
5. Load your desired amount of concentrate onto the coil. Note: Make sure that the dab tool does not touch the coils as contact with another metal may cause the coils to break or get damaged. Simply drop the concentrates atop the QDC.
6. Replace the coil cap and tighten it by winding it clockwise.
7. Do the same action to replace the mouthpiece. Note: make sure that you do not overtighten the threads as it may damage it and cause it to be loose altogether.

Loading the Yocan Evolve Plus 2-in-1 Vaporizer

1. Prepare your fresh dry herb strains. For optimum results, use a grinder to grind the herbs into finer pieces which will allow more of the ground materials to touch and make contact with the heated surface area.
2. Wind the mouthpiece counterclockwise to expose the coils on the Yocan Evolve Plus 2-in-1 Vaporizer.
3. Load desired amount of ground herbs onto the heating chamber. You can use an herb tool to scoop the ground materials or you may transfer the herbs directly from your grinder to the herb chamber. Note: Make sure to allow enough room for air to make its way from the heating element to the mouthpiece. Packing your herbs tight may cause a similarly tight airflow and you may have a hard time inhaling vapors from the Yocan Evolve Plus 2-in-1 Vaporizer.
4. Replace the mouthpiece by winding back the threaded connections. Note: make sure that you do not overtighten the threads as it may damage it and cause it to be loose altogether.

Vaping with the Yocan Evolve Plus 2-in-1 Vaporizer

1. Make sure that the Yocan Evolve Plus 2-in-1 Vaporizer is fully charged, properly sterilized, and is loaded with the right material using the right atomizer before vaping.
2. After loading, take the mouthpiece, press your lips against it and prepare to draw.
3. Press and hold the power button to activate the battery and the heating element. Inhale and pull from the vaporizer.
4. Repeat this process as necessary or as the materials are fully consumed.

Care and Maintenance of the Yocan Evolve Plus 2-in-1 Vaporizer

The Yocan Evolve Plus 2-in-1 Vaporizer has few parts which make it a solid device and is likewise easy to clean and maintain. To clean your Yocan Evolve Plus 2-in-1 Vaporizer, follow the steps below.

1. Turn the vaporizer on. Five clicks will turn it on and five clicks turns it off.
2. Turn the Yocan Evolve Plus 2-in-1 Vaporizer upside down.
3. Perform a burn-off by pressing and holding the power button for 5 seconds. Repeat this process 2 – 3 times. This will cause any residue to melt or evaporate.
4. Let the vaporizer cool down.
5. Remove the mouthpiece to gain access the herb chamber.
6. Take the included cleaning brush and gently brush the dual coils.
7. Disassemble the Yocan Evolve Plus 2-in-1 Vaporizer by turning the threaded connections counter clockwise.
8. Wipe off the vaporizer and the parts with a dry paper towel and reassemble.