Yocan Evolve Wulf Maxxx 3 in 1 Vaporizer Manual

Preparing the Yocan Evolve Maxxx 3 in 1 Vaporizer

1. Make sure that you fully charge the Evolve Maxxx 3 in 1 Vaporizer battery before use to get the best results.
2. Once you have fully charged the battery, turn the Evolve Maxxx 3 in 1 Vaporizer on by pressing the power button 5 times within two seconds.

Note: The power button is located at the middle part of the battery, it is squarish in appearance and has sides that illuminate when powered on.

Loading the Evolve Maxxx 3 in 1 Vaporizer (Wax Pen and Dab Rig Mode)

1. Prepare your wax concentrates. Use a wax container to keep the extracts.
2. Access the coils by unscrewing mouthpiece from the base.
3. Remove the coil cap by twisting them counterclockwise.
4. Carefully load the wax concentrates into the coils.
5. Close the coil cap by twisting it clockwise.
6. Replace the mouthpiece by screwing it back in place.

Loading the Yocan Evolve Maxxx 3 in 1 Vaporizer (Nectar Collector)

1. Prepare your wax concentrates. Place the concentrates in a glass jar.

Note: You will not load the Yocan Evolve Maxxx 3 in 1 Vaporizer in this mode because you will dip the atomizer tip in the jar.

Vaping with the Yocan Evolve Maxxx 3 in 1 Vaporizer (Wax Pen)

1. Make sure that the Yocan Evolve Maxxx 3 in 1 Vaporizer is fully charged and is loaded with your select wax concentrates before you start vaping.
2. After you have loaded the Yocan Evolve Maxxx 3 in 1 Vaporizer, press your lips near the mouthpiece of the Yocan Evolve Maxxx 3 in 1 Vaporizer and prepare to inhale.
3. Press and hold the power button of the Yocan Evolve Maxxx 3 in 1 Vaporizer and once it creates vapors pull and draw from the mouthpiece.
4. Repeat this process after the extracts are fully vaporized or you may stop after a full cycle.

Vaping with the Yocan Evolve Maxxx 3 in 1 Vaporizer (Nectar Collector)

1. Make sure that the Yocan Evolve Maxxx 3 in 1 Vaporizer is fully charged before you start vaping.
2. Take the touch-tip coil and slowly dip and hover it on the wax concentrates on the wax jar.
3. Press and hold the power button of the Yocan Evolve Maxxx 3 in 1 Vaporizer and once it creates vapors pull and draw from the mouthpiece.
4. Repeat this process after the extracts are fully vaporized or you may stop after a full cycle.

Vaping with the Yocan Evolve Maxxx 3 in 1 Vaporizer (Dab Rig)

1. Make sure that the Yocan Evolve Maxxx 3 in 1 Vaporizer is fully charged and is loaded with your select wax concentrates before you start vaping.
2. Connect the water pipe attachment at the bottom of the device and place it on your rig.
3. After you have connected the Yocan Evolve Maxxx 3 in 1 Vaporizer to your water pipe, press your lips near the mouthpiece of your dab rig and prepare to inhale.
4. Activate the pre-heat function of the Yocan Evolve Maxxx 3 in 1 Vaporizer (press twice) and once it creates vapors pull and draw from the rig.
5. Repeat this process after the extracts are fully vaporized or you may stop after a full cycle.

Care and Maintenance of the Yocan Evolve Maxxx 3 in 1 Vaporizer

The Yocan Evolve Maxxx 3 in 1 Vaporizer is made with few parts making it an ideal device to travel with that is likewise easy to clean and maintain. The Yocan Evolve Maxxx 3 in 1 Vaporizer is a multi-functional wax concentrate vaporizer and requires only a few steps to clean. To clean your Yocan Evolve Maxxx 3 in 1 Vaporizer, follow the steps below.

1. Wipe off any dirt or residue on the battery with a dry paper towel and continue to reassemble the Yocan Evolve Maxxx 3 in 1 Vaporizer.
2. Make sure to follow charging instructions and use the dedicated charger to avoid damaging the Yocan Evolve Maxxx 3 in 1 Vaporizer.