Yocan Falcon 6 in 1 Vaporizer Manual

Preparing the Yocan Falcon Vaporizer:

1. Make sure that you have fully charged the Yocan Falcon Vaporizer before using it for the best results.
2. After securing a fully charged battery, press the power button five times quickly to turn on the Yocan Falcon Vaporizer.

Note: The power button is the squarish button located right below the Falcon logo.

Loading the Yocan Falcon Vaporizer as a wax vaporizer:

1. Prepare your select wax concentrates. Set your extracts on the table together with the dab tool.
2. Remove the Yocan Falcon Vaporizer’s mouthpiece by unscrewing it from the atomizer base.
3. Use your dab tool to scoop up your desired amount of wax concentrates and place it atop your coil.
4. Replace the mouthpiece by twisting it back in place.

Loading the Yocan Falcon Vaporizer as a dry herb vaporizer:

1. Prepare your botanical plant matter either by breaking them by hand or by grinding them with a grinder.
2. Remove the Yocan Falcon Vaporizer’s mouthpiece by unscrewing it from the atomizer base.
3. Replace the mouthpiece by twisting it back in place.

Alternatively, you can use the Yocan Falcon Vaporizer as a nectar collector by attaching the XTAL Coils to it and dabbing straight from a jar or from the Yocan Falcon Vaporizer’s metal jar/tray. You can also swap out the mouthpiece with the Yocan Falcon Vaporizer’s glass attachment.

Changing the Yocan Falcon Vaporizer Coils:

1. Unscrew the mouthpiece by twisting it counterclockwise from the atomizer base.
2. Remove the coil installed on the atomizer base by twisting it in the same counterclockwise motion.
3. Get your choice of quartz tri coil, pancake dry herb coil, or XTAL coil and connect it to the atomizer base by twisting it clockwise.
4. Replace the mouthpiece by screwing it back in place.

Vaping with the Yocan Falcon Vaporizer:

1. Make sure that you’ve fully charged the battery, installed your select atomizer coil, and loaded the Yocan Falcon Vaporizer with your choice extracts or dry herb strains.
2. Press the power button five times quickly to activate the battery.
3. Press and hold the power button to vaporize your wax concentrates or dry herb strains.
4. Repeat this process as necessary or until the extracts or the botanicals in the atomizer is consumed.

Selecting the Temperature Settings:

1. Make sure that the battery is powered on.
2. Press the power button three times quickly to toggle through the preset temperature settings.

Care and Maintenance of the Yocan Falcon Vaporizer:

The Yocan Falcon Vaporizer is made with relatively few parts making it a device that’s easy to take care of. Follow the steps below on how you can clean and take care of your Yocan Falcon Vaporizer.

1. Wipe off any dirt or residue on the Yocan Falcon Vaporizer battery using a dry paper towel or some alcohol wipes. Continue to reassemble the Yocan Falcon Vaporizer.
2. Follow the charging instructions and use the dedicated charging cable to prolong the Yocan Falcon Vaporizer’s battery life.