Yocan FLAME Multi-functional Nectar Collector Vaporizer Manual

Preparing the Yocan Flame:

1. Make sure to fully charge the Yocan Flame to get the best results.
2. After making sure that the battery is fully charged, hit the power button five times quickly to power on the Yocan Flame.

Note: The power button is the elongated button located right below the atomizer base with the airflow adjustment tool.

Loading the Yocan Flame:

1. Prepare your wax concentrates. Place them together with the inclusive dab tool that comes with the Yocan Flame.
2. Remove the glass mouthpiece by pulling it away from the magnetic atomizer base.
3. Make sure to use your desired coil (Quartz Dual Coil or XTAL Coil).
4. Remove the coil cap by unscrewing it from the coil.
5. Use your dab tool to scoop up your desired amount of wax concentrates and place it atop your coil.
6. Replace the coil cap by twisting it back in place.
7. Replace the glass mouthpiece by sliding it back in place.

Vaping with the Yocan Flame:

1. Make sure that you’ve fully charged the battery, installed your selected coil correctly, and loaded the Yocan Flame with your select wax concentrates.
2. Press the power button five times quickly to activate the battery.
3. Press and hold the power button to vaporize your wax concentrates.
4. Repeat this process as necessary or until the extracts in the atomizer are consumed.

Using the Yocan Flame as a Nectar Collector:

1. Remove the glass mouthpiece by pulling it away from the magnetic atomizer base.
2. Get the inclusive titanium bar and let it snap with the magnetic connection of the glass mouthpiece.
3. Place your wax concentrates on the inclusive glass wax jar.
4. Use a torch to heat the titanium bar to temperature.
5. Dip the heated titanium bar on the glass wax jar.

Care and Maintenance of the Yocan Flame:

The Yocan Flame is made with relatively few parts making it a device that’s easy to take care of. Follow the steps below on how you can clean and take care of your Yocan Flame.

1. Wipe off any dirt or residue on the Yocan Flame battery using a dry paper towel or some alcohol wipes. Continue to reassemble the vaporizer.
2. Follow the charging instructions and use the dedicated charging cable to prolong the Yocan Flame’s battery life.