Yocan Flick Vaporizer Manual

Preparing the Yocan Flick Vaporizer

1. Make sure that you charge the Yocan Flick Vaporizer before use for best results.
2. Once you have secured a full charge on the Yocan Flick, power it on by clicking the power button 5 times. Note: The power button is located at the upper part of the battery facing sideward.

Loading the Yocan Flick Vaporizer Concentrate Atomizer

1. Place your concentrates on a jar, a parchment paper, or any container where you can easily pick or scoop up your concentrates upon loading.
2. Flip the metallic cap open to access the concentrate atomizer hidden inside the safety cap.
3. Once the cap has been lifted, hold the wax concentrate chamber and pull it upwards to remove it, twist it counter clockwise to remove it from the magnetic adapter. This will detach the atomizer chamber from the battery itself and will allow you to safely load the wax concentrate atomizer.
4. Unscrew the bottom part of the concentrate atomizer chamber to expose the atomizer coil.
5. Load desired amount of concentrate onto the coil. Note: Make sure that the dab tool does not touch the coils as contact with another metal may cause the coils to break or get damaged. Simply drop the concentrates atop atomizer coil.
6. Replace the bottom part and screw it back. Note: make sure that you do not overtighten the threads as it may damage it and cause it to be loose altogether.
7. Reconnect the magnetic adapter.
8. Reseat the concentrate atomizer back to the battery.

Loading the Yocan Flick Vaporizer E-Liquid Atomizer

1. Set your e-liquids aside where you can easily get them or take them up upon loading.
2. Flip the metallic cap open to access the concentrate atomizer hidden inside the safety cap.
3. Once the cap has been lifted, hold the e-liquid chamber and pull it upwards to remove it, turn it counter clockwise to remove it from the magnetic adapter. This will detach the atomizer chamber from the battery itself and will allow you to safely load the e-juice atomizer.
4. Unscrew the lid of the e-liquid atomizer chamber to access the filling hole.
5. Load desired amount of e-liquid onto the coil. Note: Make sure not to overfill the e-liquid atomizer chamber as it may result to spillage.
6. Replace the lid and screw it back. Note: make sure that you do not overtighten the threads as it may damage it and cause it to be loose altogether.
7. Reconnect the magnetic adapter.
8. Reseat the e-liquid atomizer back to the battery.

Vaping with the Yocan Flick Vaporizer

1. Make sure that the Yocan Flick Vaporizer is fully charged and is loaded with the correct variety of material depending on the atomizer before vaping.
2. Flip the safety cap open.
3. Once loaded, take the mouthpiece and press your lips against it and prepare to inhale.
4. Press and hold the power button at the same time and as the Yocan Flick Vaporizer starts generating vapors, draw and pull from the mouthpiece of the chamber.
5. Repeat this process as necessary or as the concentrates or e-liquids are fully consumed.

Care and Maintenance of the Yocan Flick Vaporizer

The Yocan Flick Vaporizer have very few components making it a solid vaporizer and is likewise easy to clean and maintain. To clean your Yocan Flick Vaporizer, follow the steps below.

1. Disconnect the wax concentrate atomizer chamber and the e-juice chamber from the battery.
2. Check for damages and decide whether to replace the broken atomizer parts.
3. Wipe off the vaporizer and the parts with a dry paper towel.