Yocan Handy Box Mod Vaporizer Manual

Preparing the Yocan Handy Box Mod Vaporizer

1. Ensure that the Yocan Handy Box Mod Vaporizer is fully charged before use to achieve best results.
2. After the battery is charged, turn on the Yocan Handy Box Mod Vaporizer on by pressing the power button 5 times quickly. Note: The power button is located at the front of the battery facing outwards. The power button is the button in the shape of a diamond at the front located just above the Handy logo. 

Loading the Yocan Handy Box Mod Vaporizer 

1. Prepare your cartridges, set them aside somewhere where there’s a stable platform so the cartridges won’t roll over or fall off the table and break. 
2. Connect the cartridge to the included 510-threaded magnetic connector. 
3. Connect the 510-threaded attachment from your cartridge to the receiving end of the magnetic adapter. Twist the magnetic adapter until tight. Note: Do not over tighten the magnetic adapter as it may cause the threads to get loose. This may cause other cartridges to experience a loose connection affecting the flow of electricity and the overall performance of the Yocan Handy Box Mod Vaporizer. 
4. Once the adapter is connected to the cartridge, you may slide the cartridge down to the Yocan Handy Box Mod Chamber until you hear a snap. 

Vaping with the Yocan Handy Box Mod Vaporizer

1. Make sure that the Yocan Handy Box Mod Vaporizer is charged and is loaded with your cartridge before you start vaping. 
2. After the Yocan Handy Box Mod Vaporizer is loaded with your select cartridge, press your lips on the mouthpiece of the mouthpiece and prepare to inhale. 
3. Press and hold the power button of the Yocan Handy Box Mod and once the Yocan Handy Box Mod Vaporizer starts generating vapors inhale from the mouthpiece of the cartridge. 
4. Repeat this process as necessary or as the e-liquid is fully consumed. 

Toggling Between the Preset Heat Settings

The Yocan Handy Box Mod Vaporizer is equipped with three preset heat profiles. Below are the corresponding light indicators for each temperature profile. 

• White Light: Low Setting
• Blue Light: Medium Setting
• Green Light: Hight Setting

To toggle in between temperature settings, please follow the steps below.

1. Power the Yocan Handy Box Mod Vaporizer on by clicking the power button 5 times.
2. Toggle between the temperature profiles by clicking on the power button 3 times. 
3. To initiate the pre-heat mode, click the power button 2 times. 
4. Click the button twice again to stop the pre-heat function. 

Care and Maintenance of the Yocan Handy Box Mod Vaporizer

The Yocan Handy Box Mod Vaporizer was made to accommodate a wide variety of cartridges. The Yocan Handy Box mod Vaporizer in itself is just a box mod battery with no cartridge included on the package. To ensure your Yocan Handy Box Mod Vaporizer stays in good shape, follow the steps below. 

1. Wipe-off any liquid residue on the vaporizer with a dry paper towel and continue with reassembling theYocan Handy Box Mod Vaporizer. 
2. Make sure to follow charging instructions and use the dedicated charging cable to avoid damaging the Yocan Handy Box Mod Vaporizer battery.