Vaporizers Chevron
Cartridge Vapes Chevron
Hot Knives
Parts & Accessories Chevron
Deals Chevron
Sub Brands Chevron
Wholesale
Account

Yocan HIT Vaporizer Manual

Everything you need to know to get started and make the most of your Yocan HIT Vaporizer.

Preparing the Yocan HIT Vaporizer

  1. Make sure that you fully charge the Yocan HIT Vaporizer before use.
  2. Once you have secured a fully charged battery, turn the vaporizer on by pressing the power button 5 times in two seconds. Note: The power button is located at the bottom part of the OLED screen facing outwards.

Loading the Yocan HIT Vaporizer 

  1. Prepare your botanicals, use a grinder to grind them into smaller and finer pieces for best results.
  2. Open the chamber by lifting the magnetic mouthpiece away from the battery.
  3. Carefully load the ground botanicals into the ceramic chamber.
  4. Replace the mouthpiece by connecting it back to the magnetic connection of the battery.

Note: You can use a small piece of paper folded halfway to funnel the ground materials into the chamber to avoid wastage. Also, when grinding your herbs, flip the grinder upside down if you want a finer grind.

Vaping with the Yocan HIT Vaporizer

  1. Make sure that the Yocan HIT Vaporizer is fully charged and is loaded with your select dry herb strains before you start vaping.
  2. After you have loaded the Yocan HIT Vaporizer, press your lips near the mouthpiece of the cartridge or your atomizer and prepare to inhale.
  3. Press and hold the power button of the Yocan HIT Vaporizer and once the Yocan HIT Vaporizer creates vapors pull and draw from the mouthpiece.
  4. Repeat this process after the herbs are fully vaporized or you may stop after a full cycle.

Note: Make sure to stir the content of the chamber occasionally to prevent charring or burning of the botanicals. Do this by pulling the mouthpiece away from the battery. Once the mouthpiece is removed, use the integrated stir tool to stir the contents of the chamber to get an even burn.

Care and Maintenance of the Yocan HIT Vaporizer

The Yocan HIT Vaporizer is made with few parts which make it a solid device and is likewise easy to clean and maintain. The Yocan HIT Vaporizer is a dry herb vaporizer and requires only a few steps to clean especially its chamber. To clean your Yocan HIT Vaporizer, follow the steps below.

  1. Wipe-off any dirt or residue on the battery with a dry paper towel and continue to reassemble the Yocan HIT Vaporizer.
  2. Make sure to follow charging instructions and use the dedicated charger to avoid damaging the Yocan HIT Vaporizer.
View product >