Yocan Keen Vaporizer Manual
Preparing the Yocan Keen Vaporizer
Note: The power button is located at the bottom part of the battery facing outwards and is the rounded shaped / circular button on the vaporizer battery. Perform sterilization during the first time you receive your Yocan Keen Vaporizer. This will eliminate and get rid of any impurities that might have made its way to the heating chamber during the manufacturing process.
- The first step is to charge your Yocan Keen Vaporizer before use.
- After charging the battery, continue by powering the Yocan Keen Vaporizer on by pressing the power button five times.
- Once the Yocan Keen Vaporizer is powered on you can begin the sterilization process. You can sterilize the coils by pressing and holding the power button for three to five seconds once or twice.
- After sterilizing the ceramic heating element, let the Yocan Keen Vaporizer rest and sit for about two to three minutes. After so, you can begin loading your select oils on the Keen Vaporizer.
Loading the Yocan Keen Vaporizer
Note: You can use a unicorn bottle when loading the Yocan Keen Vaporizer to avoid spillage when putting oils on the Yocan Keen Vaporizer’s ceramic oil chamber.
- If it’s the first time you’re using your Yocan Keen Vaporizer, be sure to sterilize it first.
- Remove the ceramic mouthpiece from the Yocan Keen Vaporizer by twisting it counterclockwise. This will disconnect the ceramic mouthpiece from the threaded connection of the ceramic central post which keeps the mouthpiece components together.
- Use your preferred loading tool (we recommend using a unicorn bottle or a funnel) to lead your select essential oils to the oil chamber of the Yocan Keen Vaporizer.
- Wait for several seconds to allow the oil to sit and saturate the chamber.
- Replace the Yocan Keen Vaporizer’s ceramic mouthpiece by twisting the mouthpiece clockwise.
Vaping with the Yocan Keen Vaporizer
- Ensure that your Yocan Keen Vaporizer is completely charged, sterilized, and is loaded with your favorite oils before you begin your vaping session.
- Next, ensure that the Yocan Keen Vaporizer is loaded and press your lips onto the mouthpiece and prepare to draw or inhale.
- Press and hold the power button. When the Yocan Keen Vaporizer starts making vapors inhale from the mouthpiece.
- Prepare to inhale from the mouthpiece when you have decided on your preferred settings.
- Repeat this process as necessary or as the oils are fully consumed.
Changing the Voltage Setting of the Yocan Keen Vaporizer
Note: Make sure that the Yocan Keen Vaporizer is powered on.
- Press the power button three times to change the temperature setting.
- Release the button to activate your preferred voltage level.
Yocan Keen Vaporizer Voltage Levels:
- 3.0 volts – White Light
- 3.7 volts – Blue Light
- 4.2 volts – Green Light
Activating the Pre-heat Setting of the Yocan Keen Vaporizer
Note: Make sure that the Yocan Keen Vaporizer is powered on.
- Press the power button two times.
Care and Maintenance of the Yocan Keen Vaporizer
The Yocan Keen Vaporizer was made with few parts which makes it easy to clean and to maintain, despite its disposable nature. Likewise, having fewer parts to work with makes your vaporizer more robust and more durable. To keep your Yocan Keen Vaporizer clean and in good working condition and extend its lifespan before you need to dispose it, follow the steps below.
- Tap the power button five times to power the Yocan Keen Vaporizer on. Five more clicks will turn the Yocan Keen Vaporizer off.
- Turn the Yocan Keen Vaporizer upside down.
- Conduct a burn-off by pressing and holding the power button for three to five seconds. Repeat this process once or twice. Doing so will melt any residue making the cleaning process easy.
- Let the vaporizer cool down.
- Dismantle the Yocan Keen Vaporizer by pulling the magnetic connections and by twisting the threaded connections counter clockwise.
- Remove any liquid residue on the vaporizer using a dry paper towel and proceed with reassembling the Yocan Keen Vaporizer.