Yocan Kodo Plus Box Mod Vaporizer Manual

Charging the Yocan Kodo Plus Box Mod Vaporizer

1. Take a USB Type-C charging cable and connect it to the port located at the bottom or base of the Yocan Kodo Plus Box Mod Vaporizer.
2. Take the other end of the charging cable and connect it to a power brick, and then plug it into a wall socket.

Note: Alternatively, you may connect the charging cable to a desktop, laptop, or a compatible game console to recharge the Yocan Kodo Plus Box Mod Vaporizer. The charging port is located on the bottom part of the device. The Yocan Kodo Plus Box Mod Vaporizer does not come with a USB Type-C charging cable.

Preparing the Yocan Kodo Plus Box Mod Vaporizer

1. Make sure to fully charge the Yocan Kodo Plus Box Mod Vaporizer to get the best results.
2. After making sure that the battery is fully charged, hit the power button five times quickly to power on the Yocan Kodo Plus Box Mod Vaporizer.

Note: The power button is the circular button located at the top of the voltage level indicator.

Loading the Yocan Kodo Plus Box Mod Vaporizer Pre-filled Cartridge

1. Prepare your cartridge.
2. Link it to the 510-threaded connection.
3. Tighten the cartridge clockwise.
4. Stop when you feel sufficient resistance.

Loading the Yocan Kodo Plus Box Mod Vaporizer Refillable Cartridge

1. Prepare your wax concentrates or oils. Place them inside the cartridge using a dab tool or a unicorn bottle.
2. Seal the cartridge.
3. Link it to the 510-threaded connection.
4. Tighten the cartridge clockwise.
5. Stop when you feel sufficient resistance.

Note: Avoid removing the cartridge while the said part is still hot. It can affect the integrity of the components and it might cause minor burns on your finger.

Replacing the cartridge of the Yocan Kodo Plus Box Mod Vaporizer

1. Make sure that the Yocan Kodo Plus Box Mod Vaporizer is powered off and has cooled down.
2. Twist the mouthpiece counterclockwise.
3. Pick your cartridge, which could be pre-filled or refillable.
4. Connect the cartridge to the 510-threaded connection.
5. Twist it clockwise until you feel enough resistance.

Vaping with the Yocan Kodo Plus Box Mod Vaporizer

1. Make sure that you have fully charged the battery of the Yocan Kodo Plus Box Mod Vaporizer, installed your cartridge correctly, and loaded the device with your preferred wax concentrates or oil.
2. Press the power button five times quickly to activate the battery.
3. Press and hold the power button to vaporize your wax concentrates or extract in the cartridges.
4. Repeat this process as necessary or until the extracts in the cartridge are consumed.

Changing the voltage level of the Yocan Kodo Plus Box Mod Vaporizer

1. Make sure that the Yocan Kodo Plus Box Mod Vaporizer is powered on, press the power button five times quickly if it is still powered off.
2. Press the voltage adjustment button once to cycle through the five voltage settings.
3. Once you have selected your preferred temperature level, leave the button and the device will automatically read your selection.

Yocan Kodo Plus Box Mod Vaporizer Voltage Levels:

• 2.4 volts
• 2.8 volts
• 3.2 volts
• 3.6 volts
• 4.0 volts

Care and Maintenance of the Yocan Kodo Plus Box Mod Vaporizer

The Yocan Kodo Plus Box Mod Vaporizer is made with relatively few parts making it a device that’s easy to take care of. Follow the steps below on how you can clean and take care of your Yocan Kodo Plus Box Mod Vaporizer.

1. Wipe off any dirt or residue on the Yocan Kodo Plus Box Mod Vaporizer battery using a dry paper towel or some alcohol wipes. Continue to reassemble the vaporizer.
2. Follow the charging instructions and use the dedicated charging cable to prolong the Yocan Kodo Plus Box Mod Vaporizer.
3. For maintaining the coils, make sure to refrain from using any hard objects to tamper with the 510-threaded link. In the event of a damaged connection, refrain from using the Yocan Kodo Plus Box Mod Vaporizer.