Yocan Kodo Plus Zodiac Edition Manual

Charging the Yocan Kodo Plus Zodiac Edition Box Mod 

1. Make sure to use a USB type-C charging to charge the Yocan Kodo Plus Zodiac Edition Box Mod.  
2. Connect the USB charging cable to a wall adapter and plug the wall adapter to a wall outlet.  
3. Take the other end of the charging cable and connect it to the Yocan Kodo Plus Zodiac Edition Box Mod. 

Note: You can connect the charging cable to your computer or any compatible USB port to charge the Yocan Kodo Plus Zodiac Edition Box Mod. The charging port is located at the bottom of the vaporizer. When charging, it is recommended that you remove the cartridge as the wax or oil might leak when the device is lying down.  

Turning the Yocan Kodo Plus Zodiac Edition Box Mod On  

1. Make sure to fully charge the Yocan Kodo Plus Zodiac Edition Box Mod for best results. 
2. Press the power button of the Yocan Kodo Plus Zodiac Edition Box Mod five times quickly to power it on. 
3. Press the same power button for another five times to turn the Yocan Kodo Plus Zodiac Edition Box Mod off.  

Note: The power button is located at the upper part of the Yocan Kodo Plus Zodiac Edition Box Mod’s digital display screen. It is the circular button which is located on the front-facing part of the cartridge vaporizer.   

Loading the Yocan Kodo Plus Zodiac Edition Box Mod 

1. Make sure to turn off the Yocan Kodo Plus Zodiac Edition Box Mod by pressing the power button five times rapidly.  
2. Once the Yocan Kodo Plus Zodiac Edition Box Mod is powered off, simply connect the cartridge to the base of the battery and twist clockwise.  
3. To remove the cartridge, twist it towards the opposite direction and carefully handle the cart until it comes off the threaded base.  

Note: Avoid overtightening the cartridges as it might damage the threads. Twist it clockwise until you feel resistance on your fingers. Do not leave the cartridge with some play in it. 

Selecting the Temperature Level for the Yocan Kodo Plus Zodiac Edition Box Mod

2. Make sure that the Yocan Kodo Plus Zodiac Edition Box Mod is powered on. 
3. Select your preferred temperature level by pressing either the + or - button.  
4. Release the button when you have decided on the temperature level you want.  

Note: The Yocan Kodo Plus Zodiac Edition Box Mod has precise temperature settings that range from 1.8 volts to 4.2 volts.  

Installing a lanyard on the Yocan Kodo Plus Zodiac Edition Box Mod 

1. Get a lanyard of your choice, you can also use the Yocan-branded lanyard for a more aesthetic look.  
2. Slide the tip of the lanyard onto the hanging hole.  
3. Tighten the lanyard’s connection by pulling the lanyard.  

Maintenance and cleaning of the Yocan Kodo Plus Zodiac Edition Box Mod 

1. Make sure to remove the cartridge of the Yocan Kodo Plus Zodiac Edition Box Mod.  
2. Turn off the Yocan Kodo Plus Zodiac Edition Box Mod by pressing the power button five times rapidly.  
3. Take a cotton swab and wipe the cartridge contacts clean.  
4. Use a dry paper towel and wipe the body of the Yocan Kodo Plus Zodiac Edition Box Mod clean.   
5. Follow the charging instruction and use the dedicated charging cable for the Yocan Kodo Plus Zodiac Edition Box Mod to avoid battery damage. 
6. Make sure to charge the Yocan Kodo Plus Zodiac Edition Box Mod before storing it too long. 

Note: Make sure to keep the parts dry before storing as it may cause mold buildup and may have negative effects if used. Use a dry paper towel or paper cloth after wiping the parts with a damp material, so as not to allow molds to develop on the device.