FREE DOMESTIC SHIPPING FOR ORDERS OVER $50

Vaporizers Chevron
Cartridge Vapes Chevron
Hot Knives
Parts & Accessories Chevron
Deals Chevron
Sub Brands Chevron
Wholesale
Account

Yocan Kodo Pro Box Mod Manual

Everything you need to know to get started and make the most of your Yocan Kodo Pro Box Mod.

How to charge the Yocan Kodo Pro Vaporizer

  1. Use a compatible USB type-C charging cable. Connect it to a USB type-C compatible wall adapter.
  2. Connect the USB type-C tip to the Yocan Kodo Pro Vaporizer and the wall charger to a wall outlet.
  3. Wait for the battery to recharge.
Note: The Yocan Kodo Pro Vaporizer does not include a USB type-C charging cable or a wall charger. If you do not have a wall charger, you can connect the USB type-C to your computer.

How to turn on the Yocan Kodo Pro Vaporizer

  1. Make sure that the Yocan Kodo Pro Vaporizer is fully charged for best results.
  2. Press the power button five times.
  3. Wait for the digital OLED screen to turn on.
Note: The power button is located on top of the digital OLED screen. It is squarish in shape.

How to change the temperature of the Yocan Kodo Pro Vaporizer

  1. Make sure that the Yocan Kodo Pro Vaporizer is powered on.
  2. Press the (+) button on the right side of the Yocan Kodo Pro Vaporizer. It will increase the voltage level by 0.1-volt.
  3. Press the (-) button on the left side of the Yocan Kodo Pro Vaporizer. It will decrease the voltage level by 0.1-volt.
  4. When you have selected your preferred temperature level, release the (+) or (-) face buttons.

How to activate preheat mode with the Yocan Kodo Pro Vaporizer

  1. Make sure to power on the Yocan Kodo Pro Vaporizer.
  2. Press the power button twice to enter preheat mode.
  3. Press the power button two time again to cancel preheat function.

How to activate sesh mode on the Yocan Kodo Pro Vaporizer

  1. Make sure the Yocan Kodo Pro Vaporizer is turned on.
  2. Long press the power button for three seconds.
Note: The Yocan Kodo Pro Vaporizer will heat up for 15 seconds while in sesh mode. The OLED display will flash warning “Over Time” for two seconds once the 15-second sesh mode is complete.

How to check puff counter with Yocan Kodo Pro Vaporizer

  1. Power the Yocan Kodo Pro Vaporizer on.
  2. On the digital OLED screen, look at the lower left and search for the puff counter that ends with the letter “P.”
Note: Once the Yocan Kodo Pro Vaporizer puff counter reaches 9999, it will be reset automatically. To reset automatically, click the power button and the (-) button at the same time.

How to connect a cartridge with the Yocan Kodo Pro Vaporizer

  1. It is best to connect the cartridge while the device is off.
  2. Take your refillable or prefilled cartridge and connect it to the 510-threaded link.
  3. Turn it clockwise to tighten the connection.
  4. Turn the cartridge counter clockwise to loosen it and remove it.
Note: To avoid any issues when connecting the cartridge, stop tightening when you feel some resistance. Overtightening the cartridge could cause the battery to not read the cartridge. If you experience any issue, just remove and replace the cartridge.

How to clean the Yocan Kodo Pro Vaporizer

  1. Remove the cartridge from the Yocan Kodo Pro Vaporizer by following the above mentioned steps.
  2. Use a cotton swab and gently clean the 510-threaded connections of the Yocan Kodo Pro Vaporizer.
  3. Use the same cotton swab to clean the metal contacts of your refillable or pre-filled cart.
  4. If your Yocan Kodo Pro Vaporizer has oil spills and smudges on the body, you may use a dry cloth or paper towel to remove the oil spills.

How to connect a lanyard to the Yocan Kodo Pro Vaporizer

  1. Get your lanyard or wrist lace.
  2. Insert the loop on the side of the Yocan Kodo Pro Vaporizer.
Note: The Yocan Kodo Pro Vaporizer does not come with a lanyard.
View product >