Yocan Loaded Vaporizer Manual

Preparing the Yocan Loaded Vaporizer

1. Make sure that you charge the Yocan Loaded Vaporizer before use.
2. Once you have secured a full charge, turn on the Yocan Loaded Vaporizer battery by clicking the power button 5 times. Note: The power button is the elongated button located at the middle part of the battery facing outwards just above the Yocan Loaded logo.
3. Once the Yocan Loaded Vaporizer is turned on you can sterilize the heating element by pressing and holding the same power button for 5 seconds twice or thrice. Note: perform sterilization during the first time you receive your Yocan Loaded Vaporizer. This will eliminate and get rid of any impurities that might have made its way to the heating chamber during the manufacturing process.
4. After you’re done with sterilizing the Yocan Loaded Vaporizer, you can let it sit and rest for about 2 – 3 minutes. After that, you can now load your select concentrates to your Yocan Loaded Vaporizer.

Loading the Yocan Loaded Vaporizer

1. Set your materials on a parchment paper, a container, a dab mat, or any receptacle where you can easily scoop it out upon loading.
2. Make sure you’ve prepared your Yocan Loaded Vaporizer first if it’s the first time you’re using it. Note: Follow steps for preparing the Yocan Loaded Vaporizer.
3. Locate the hatch at the side of the battery. Pull the hatch open to expose the window where you can access the atomizer. Opening the window exposes the coils that are connected magnetically to the atomizer base.
4. The Yocan Loaded Vaporizer comes with two coils, select whether to use the Quartz Dual Coils (QDC) or the Yocan Quad Coils.
5. Load desired amount of concentrate onto the selected coil. Note: Make sure that the dab tool does not touch the coils as contact with another metal may cause the coils to break or get damaged. Simply drop the concentrates atop the QDC or at the base pole of the Yocan Quad Coils.
6. Reseal or close the window and shut the hatch close.

Extending the Mouthpiece 

1. Twist the base of the mouthpiece counter clockwise.
2. Wait for the mouthpiece to fully extend.
3. Twist the base of the mouthpiece clockwise.
4. This will retract the mouthpiece back and hide it.

Vaping with the Yocan Loaded Vaporizer 

1. Make sure that the Yocan Loaded Vaporizer is sterilized, charged, and is loaded before vaping.
2. Once loaded, extend the mouthpiece and press your lips against it and prepare to draw.
3. Press and hold the power button at the same time and as the Yocan Loaded Vaporizer begins yielding vapors, inhale and draw from the vaporizer.
4. Repeat this process as necessary or as the concentrates are fully consumed.

Care and Maintenance of the Yocan Loaded Vaporizer

The Yocan Loaded Vaporizer has few parts that makes it a solid device and is likewise straightforward to clean and maintain. To clean your Yocan Loaded Vaporizer, follow the steps below.

1. Turn the vaporizer on.
2. Turn the Yocan Loaded Vaporizer upside down.
3. Conduct a burn-off by pressing and holding the power button for 5 seconds. Repeat this process 2 – 3 times simultaneously. This will cause any residue to melt or evaporate.
4. Let the vaporizer cool down.
5. Disassemble the Yocan Loaded Vaporizer.
6. Wipe off the Yocan Loaded Vaporizer and the parts with a dry paper towel and reassemble.