Yocan Loki Portable Vaporizer Manual

Preparing the Yocan Loki Portable Vaporizer

1. Fully charge your Yocan Loki’s battery for best results. Connect the USB charging cable to a computer or a wall adapter and the USB-C tip to the vaporizer (the charging pot can be found on the vaporizer just above the Yocan logo).
2. Once you have fully charged the battery, turn the Yocan Loki Portable Vaporizer on by pressing the power button with one long click or until the light on the vaporizer turns on.

Note: The power button is located at the bottom part of the battery, it is circular in appearance and has sides that illuminate when powered on.

Loading the Yocan Loki Portable Vaporizer

1. Prepare your wax concentrates. Use a wax container to keep the extracts.
2. Remove the cap to reveal the XTAL Tip.
3. You are ready to vape.

Vaping with the Yocan Loki Portable Vaporizer

1. Make sure that the Yocan Loki Portable Vaporizer is fully charged and that you have prepared your select wax concentrates before you start vaping.
2. Turn the device on by pressing the power button five times.
3. Gently hover the XTAL Tip over the wax concentrates and inhale from the mouthpiece.
4. Repeat this process after the extracts are fully vaporized.

Changing the Temperature Level of the Yocan Loki Portable Vaporizer

1. Make sure that the Yocan Loki Portable Vaporizer is powered on.
2. Press the power button three times rapidly to toggle through the available preset temperature levels.

Voltage Settings:

• Low – 3.2 volts
• Medium – 3.7 volts
• High – 4.2 volts

Note: Each voltage level is also represented by a dedicated LED light setting allowing you to see the running voltage level from a distance. Low is represented by a white light, medium in blue light, and high in green light.

Accessing Session Mode

1. You can access Session Mode by pressing the power button two times.
2. Press the power button twice again to stop Session Mode.

Accessing On Demand Mode

1. You can access On Demand Mode by pressing and holding down the power button.
2. Lift your finger from the power button to stop On Demand Mode.

Care and Maintenance of the You can access Session Mode by pressing the power button two times.

The Yocan Loki Portable Vaporizer is a portable nectar collector that is made with few parts making it an ideal device to travel with that is likewise easy to clean and maintain. The Yocan Loki Portable Vaporizer is a simple and straightforward wax concentrate vaporizer and requires only a few steps to clean. To maintain your Yocan Loki Portable Vaporizer, follow the steps below.

1. Wipe off any dirt or residue on the battery with a dry paper towel.
2. Disassemble the Yocan Loki Portable Vaporizer and separate the removable parts.
3. For battery maintenance, make sure to follow charging instructions and use the dedicated charger to avoid damaging the Yocan Loki Portable Vaporizer battery.