Yocan LUX 510 Threaded Vape Pen Battery Manual

Preparing the Yocan LUX 510 Threaded Vape Pen Battery

1. Fully charge your Yocan LUX 510 Threaded Vape Pen Battery for best results.  Connect the USB charging cable to a computer or a wall adapter and the micro USB tip to bottom of the battery.
2. Once you have fully charged the battery, turn the Yocan LUX 510 Threaded Vape Pen Battery on by pressing and holding the power button until the light on the vaporizer turns on.  

Note: The power button is located at the top part of the battery, it is squarish in appearance and has sides that illuminate when powered on.  

Loading the Yocan LUX 510 Threaded Vape Pen Battery

1. Loading is based on the coil or cartridge you will use on the battery.  
2. If you are using a refillable cartridge, load it with your select oils or wax concentrates and secure the cartridge to avoid leaks.  
3. If you are using a pre-filled cartridge, just connect the 510-threaded connection to the battery.

Note: When connecting the cartridge or coil, make sure to stop when you feel a significant resistance to avoid damaging the 510-threaded connection.

Vaping with the Yocan LUX 510 Threaded Vape Pen Battery

1. Make sure that the Yocan LUX 510 Threaded Vape Pen Battery is fully charged and is loaded with your select cartridges before you start vaping.  
2. After you have loaded the Yocan LUX 510 Threaded Vape Pen Battery, turn the device on by holding down the power button.  
3. Press your lips against the mouthpiece of the cartridge and once it creates vapors pull and draw from the water pipe.  
4. Repeat this process after the oils or extracts are fully vaporized or you can manually stop the Yocan LUX 510 Threaded Vape Pen Battery by letting go of the power button.

Changing the Temperature Level of the Yocan LUX 510 Threaded Vape Pen Battery

1. Make sure that the Yocan Rex Portable Enail Vaporizer Kit is fully charged.  
2. Twist the dial on the top of the battery and refer to the printed voltage level of the edge of the dial.  

Activating the Pre-Heat Setting

1. To activate the pre-heat setting, simply press the power button twice.  
2. To deactivate, press the power button two more times.  

Care and Maintenance of the Yocan LUX 510 Threaded Vape Pen Battery

The Yocan LUX 510 Threaded Vape Pen Battery is a portable vape battery that is made with few parts making it an ideal device to travel with that is likewise easy to clean and maintain. The Yocan LUX 510 Threaded Vape Pen Battery is a simple and straightforward vaporizer and requires only a few steps to clean. To maintain your Yocan LUX 510 Threaded Vape Pen Battery, follow the steps below.  

1. Wipe off any dirt or residue on the battery with a dry paper towel.
2. For battery maintenance, make sure to follow charging instructions and use a compatible charger to avoid damaging the Yocan LUX 510 Threaded Vape Pen Battery.