Yocan Orbit Vaporizer Pen Manual

Preparing the Yocan Orbit Vaporizer Pen

1. Fully charge your Yocan Orbit Vaporizer Pen’s battery for ideal results. Connect the USB charging cable to a computer or a wall adapter and the USB Type-C tip to the vaporizer (the charging port can be found on the device just above the Yocan logo).
2. Once you have fully charged the battery, you can start using the Yocan Orbit Vaporizer Pen by pressing the power button five times quickly.

Note: The power button of the Yocan Orbit Vaporizer Pen can be found at the body of the battery right above the “ORBIT” logo. The power button is the hexagonal button on the device and lights up once powered on.

Loading the Yocan Orbit Vaporizer Pen

1. Prepare your select wax concentrates before using the Yocan Orbit Vaporizer Pen.
2. Remove the glass mouthpiece and cover of the Yocan Orbit Vaporizer Pen simply by pulling it away from the battery.
3. Load your wax concentrates onto the coil-less atomizer using the included pick tool.
4. Replace the glass mouthpiece and cover by gently pushing it towards the battery.
5. Make sure the Yocan Orbit Vaporizer Pen is powered on.
6. Select your preferred temperature level.
7. You are ready to vape.

Note: The Yocan Orbit Vaporizer Pen uses O-rings to keep the glass mouthpiece and cover in place. If you find that the O-rings are removed from their grooves during the removal and replacement of the glass mouthpiece and cover, try twisting it while removing or replacing it to avoid dislodging the rubber.

Vaping with the Yocan Orbit Vaporizer Pen

1. Make sure that the Yocan Orbit Vaporizer Pen is fully charged and that you have prepared your select wax concentrates or extracts before you start vaping.
2. Select your preferred voltage setting pressing the power button three times.
3. Prepare to inhale from the mouthpiece when you have decided on your preferred settings.
4. Press and hold the power button to activate the heating element.
5. Repeat this process until you are satisfied or until the wax concentrates are fully consumed.

Changing the Temperature Level of the Yocan Orbit Vaporizer Pen

1. Make sure that the Yocan Orbit Vaporizer Pen is fully charged.
2. Press the power button three times to cycle through the preset temperature settings.
3. When you have found the right temperature level, let go of the button and it will automatically activate the selected profile.

Voltage Settings:

• Low – 3.4 volts
• Medium – 3.7 volts
• High – 4.0 volts

Note: Each voltage level is represented by a dedicated LED light, low temperature setting is White, middle temperature setting is Blue, and high temperature setting is Green.

Activating Pre-Heat Function

1. You can activate the Yocan Orbit Vaporizer Pen’s pre-heat function by pressing the power button twice.
2. To cut off pre-heat, simply press the power button twice again.

Note: In pre-heat mode, the Yocan Orbit Vaporizer Pen uses a constant low temperature level of 3.4 volts. It warms up the wax concentrates without extracting its cannabinoids in the process.

Care and Maintenance of the Yocan Orbit Vaporizer Pen

The Yocan Orbit Vaporizer Pen is a portable wax pen that is made with few parts making it an ideal device to travel with that is likewise easy to clean and maintain. The Yocan Orbit Vaporizer Pen is a simple and straightforward oil vaporizer and requires only a few steps to clean. To maintain your Yocan Orbit Vaporizer Pen, follow the steps below.

1. Wipe off any dirt or residue on the battery with a dry paper towel.
2. Disassemble the Yocan Orbit Vaporizer Pen and separate the removable parts.
3. For battery maintenance, make sure to follow charging instructions and use the dedicated charger to avoid damaging the Yocan Orbit Vaporizer Pen battery.