Yocan Red Katana Torch Manual

Operating the Yocan Red Katana Torch:  

1. Make sure the switch is not locked.  
2. Push the switch to activate the ignition system.  

Note: The locking and unlocking mechanism of the Yocan Red Katana Torch can be found on the side of the torch lighter’s ignition trigger.  

Adjusting the flame of the Yocan Red Katana Torch:  

1. Locate the adjustment knob on the Yocan Red Katana Torch.  
2. Slide the knob to the left to increase the heat and reduce the reach.  
3. Slide the knob to the right to decrease heat and improve the reach.  

Note: The adjustment tool can be found on the backside of the Yocan Red Katana Torch’s handle.  

Checking the Fuel Tank of the Yocan Red Katana Torch

• Make sure that the nozzle of the Yocan Red Katana Torch is cool enough.  
• Check the silicone hand grip of the Yocan Red Katana Torch.  
• Look at the visible tank at the hand grip.  
• Check how much butane is still in the eight-gram tank.  

Refilling the Yocan Red Katana Torch:  

1. Turn the Yocan Red Katana Torch upside down.  
2. Get your butane canister and prop the pump tube to the refilling slot.  
3. Press the butane canister down until the butane tank is full.  

Cleaning and maintenance of the Yocan Red Katana Torch:  

1. Wipe the Yocan Red Katana Torch with either a damp cloth or a clean dry paper towel.  
2. Clean any dirt, grime, or residue.  
3. Always keep the Yocan Red Katana Torch standing upright (unless when refilling) to avoid leaks.  

Note: The Yocan Red Katana Torch is designed to stand upright during storage.