Yocan Red Legends Torch Manual

Operating the Yocan Red Legends Torch 

1. Make sure the trigger is not locked.  
2. Push the trigger button downward and hold it down.  

Note: The trigger mechanism of the Yocan Red Legends Torch can be found on the front end of the torch lighter.  

Adjusting the flame of the Yocan Red Legends Torch

1. Locate the adjustment lever on the Yocan Red Legends Torch.  
2. Swing the knob to the right to increase the heat and improve the reach.  
3. Swing the knob to the left to decrease the heat and reduce the reach.  

Note: The adjustment tool can be found on the rear end of the Yocan Red Legends Torch. 

Locking the Yocan Red Legends Torch Flame  

1. Locate the locking mechanism at the front end of the Yocan Red Legends Torch.  
2. Push the locking mechanism to the right to lock the flame.  

Note: the flame can be locked and unlocked anytime depending on your needs. Simply slide the control to lock. Slide it the other way to unlock.   

Refilling the Yocan Red Legends Torch

1. Turn the Yocan Red Legends Torch upside down.  
2. Locate the bottom of its gas tank, which can be found under the torch lighter.  
3. Get your butane canister and prop the pump tube to the refilling slot.  
4. Press the butane canister down until the butane tank is full.  

Note:  Wait for 10 seconds for the tank to be filled. Wait for two minutes before using again. This is important and be sure to let the Yocan Red Legends Torch before using it for another session. This will prolong the lifespan of the lighter.  

Cleaning and maintenance of the Yocan Red Legends Torch

1. Wipe the Yocan Red Legends Torch with either a damp cloth or a clean dry paper towel.  
2. Clean any dirt, grime, or residue.  
3. Always keep the Yocan Red Legends Torch standing upright (unless when refilling) to avoid leaks.  

Note: The Yocan Red Legends Torch is designed to stand upright during storage.