Yocan (R)Evolve Vaporizer Manual

Preparing the Yocan (R)Evolve Vaporizer

1. Ensure that you have fully charged the Yocan (R)Evolve Vaporizer before usage.
2. Once you have it at full charge, power on the vaporizer battery by clicking the power button 5 times rapidly. Note: The power button is located at the middle part of the battery facing outwards just below the Yocan logo.
3. Once the Yocan (R)Evolve Vaporizer is powered on you can begin sterilizing the heating element by pressing and holding the power button for 5 seconds not longer and no more than two or three times. Note: perform sterilization during the first time you receive your Yocan (R)Evolve Vaporizer. This will eliminate and get rid of any impurities that might have made its way to the heating chamber during the manufacturing process.
4. Once you’re finished with sterilization, you can let the vaporizer sit and rest for about 2 – 3 minutes. After so, you can load your select concentrates to your Yocan (R)Evolve Vaporizer.

Loading the Yocan (R)Evolve Vaporizer

1. Lay your concentrates on a place where you can safely scoop or pick your concentrates upon loading. This may be a parchment paper, a glass jar, or any container.
2. Make sure you’ve prepared your Yocan (R)Evolve Vaporizer first if it’s the first time you’re using it. Note: Follow steps for preparing the Yocan (R)Evolve Vaporizer.
3. Twist the mouthpiece counterclockwise to reveal the Yocan Quartz Dual Coils (QDC).
4. The coil cap can be removed using the same counter clockwise action. Removing the mouthpiece exposes the coils that are covered with the coil cap.
5. Load your desired amount of concentrate onto the coil. Do not overfill the concentrate chamber as it may cause the materials to spill over. Note: Make sure that the dab tool does not touch the coils as contact with another metal may cause the coils to break or get damaged. Simply drop the concentrates atop the QDC.
6. Return the coil cap and tighten it by turning it clockwise.
7. Perform the same action to replace the mouthpiece. Note: make sure that you do not overtighten the threads as it may damage it and cause it to be loose altogether.

Using the Yocan (R)Evolve Vaporizer

1. Ensure that the Yocan (R)Evolve Vaporizer is properly sterilized, properly charged, and is correctly loaded before vaping.
2. After loading, get the mouthpiece and press your lips against it while preparing to inhale.
3. Press and hold the power button on the device and as the Yocan (R)Evolve Vaporizer begins producing vapors, pull from the vaporizer.
4. Repeat this process as necessary or as the concentrates are fully consumed.

Care and Maintenance of the Yocan (R)Evolve Vaporizer

Your Yocan (R)Evolve Vaporizer was made with only few parts making it a solid device that is likewise easy to clean and maintain. To clean your Yocan (R)Evolve Vaporizer, follow the steps below.

1. Power the vaporizer on. Five taps on the power button will turn it on and five more taps turns it off.
2. Turn the Yocan (R)Evolve Vaporizer upside down.
3. Do a burn-off by pressing and holding the power button for 5 seconds. Repeat this process 2 – 3 times. This will cause any residue or leftover wax to melt or evaporate.
4. Let the Yocan (R)Evolve Vaporizer cool down.
5. Strip the Yocan Evolve Vaporizer by turning the threaded connections counter clockwise.
6. Wipe off the vaporizer and the parts with a dry paper towel and reassemble.