Skip to content
Vaporizers Chevron
Cartridge Vapes Chevron
Hot Knives
Parts & Accessories Chevron
Deals Chevron
Sub Brands Chevron
Wholesale
Account

Yocan Torch XL Enail Manual

Everything you need to know to get started and make the most of your Yocan Torch XL Enail.

Preparing the Yocan Torch XL Enail:

  1. Make sure to fully charge the Yocan Torch XL Enail battery for the best results.
  2. After securing a fully charged battery, hit the power button five times quickly to power on the Yocan Evolve 2 in 1 Vaporizer.

Note: The power button is the circular button located right above the battery surrounded with the Torch XL logo.

Loading the Yocan Torch XL Enail with Wax:

  1. Prepare your wax concentrates. Place them together with the inclusive dab tool that comes with the Yocan Torch XL Enail.
  2. Remove the Yocan Torch XL Enail’s metal or glass tube by pulling it away from the atomizer base.
  3. Remove the coil cap by unscrewing it from the coil.
  4. Use your dab tool to scoop up your desired amount of wax concentrates and place it atop your coil.
  5. Replace the coil cap by twisting it back in place.
  6. Replace the tubing by pushing it back in place.

Changing the Yocan Torch XL Enail Coils:

  1. Remove the Yocan Torch XL Enail’s glass or metal tube by pulling it away from the atomizer base.
  2. Select your atomizer of choice and screw it in place.
  3. Replace the glass or metal tube by pressing it down the atomizer base.

Vaping with the Yocan Torch XL Enail:

  1. Make sure that you’ve fully charged the battery, installed your selected coil correctly, and loaded the Yocan Torch XL Enail with your select wax concentrates.
  2. Press the power button five times quickly to activate the battery.
  3. Press and hold the power button to vaporize your wax concentrates.
  4. Repeat this process as necessary or until the extracts in the atomizer are consumed.

Care and Maintenance of the Yocan Torch XL Enail:

The Yocan Torch XL Enail is made with relatively few parts making it a device that’s easy to take care of. Follow the steps below on how you can clean and take care of your Yocan Torch XL Enail.

  1. Wipe off any dirt or residue on the Yocan Torch XL Enail battery using a dry paper towel or some alcohol wipes. Continue to reassemble the vaporizer.
  2. Follow the charging instructions and use the dedicated charging cable to prolong the Yocan Torch XL Enail’s battery life.
View product >