Vaporizers Chevron
Cartridge Vapes Chevron
Hot Knives
Parts & Accessories Chevron
Deals Chevron
Sub Brands Chevron
Wholesale
Account

Yocan UNI 3.0 Plus Box Mod Manual

Everything you need to know to get started and make the most of your Yocan UNI 3.0 Plus Box Mod.

Charging the Yocan UNI Pro 3.0 Plus Box Mod 

  1. Make sure to use the USB type-C charging cable included in the packaging of the Yocan UNI Pro 3.0 Plus Box Mod.  
  2. Connect the USB charging cable to a wall adapter and plug the wall adapter to a wall outlet.  
  3. Take the other end of the charging cable and connect it to the Yocan UNI Pro 3.0 Plus Box Mod. 

Note: You can connect the charging cable to your computer or any compatible USB port to charge the Yocan UNI Pro 3.0 Plus Box Mod. The changing port is located at the bottom of the vaporizer. When charging, it is recommended that you remove the cartridge as the wax or oil might leak when the device is lying down.  

Turning the Yocan UNI Pro 3.0 Plus Box Mod On  

  1. Make sure to fully charge the Yocan UNI Pro 3.0 Plus Box Mod for best results. 
  2. Press the power button of the Yocan UNI Pro 3.0 Plus Box Mod five times quickly to power it on. 
  3. Press the same power button for another five times to turn the Yocan UNI Pro 3.0 Plus Box Mod off.  

Note: The power button is located at the upper front part of the Yocan UNI Pro 3.0 Plus Box Mod. It is the circular button which sits on top of the display screen and below the width adjustment part.  

Selecting the Temperature Level for the Yocan UNI Pro 3.0 Plus Box Mod 

  1. Make sure that the Yocan UNI Pro 3.0 Plus Box Mod is powered on. 
  2. Select your preferred temperature level by pressing the + or - button depending on your preference. These buttons are found at the bottom part of the digital display screen.  
  3. Release the button when you have decided on the temperature level you want.  

Note: The Yocan UNI Pro 3.0 Plus Box Mod has precise temperature settings that range from 1.8V to 4.2 V.  

Operating the height and width adjustment tool of the Yocan UNI Pro 3.0 Plus Box Mod 

  1. Make sure that the Yocan UNI Pro 3.0 Plus Box Mod is powered off, press the power button five times to check. 
  2. Take your preferred cartridge and connect it to the included 510-threaded magnetic component.  
  3. Slide the cartridge with the magnetic tool into the chamber.  
  4. Push the height adjustment tool upwards to push the cartridge up. Push it down to hide the cartridge. 
  5. Turn the width adjustment tool counter clockwise to loosen the chamber, turn it clockwise to give the cartridge a snug fit.  

Maintenance and cleaning of the Yocan UNI Pro 3.0 Plus Box Mod 

  1. Make sure to remove the cartridge of the Yocan UNI Pro 3.0 Plus Box Mod.  
  2. Turn off the Yocan UNI Pro 3.0 Plus Box Mod by pressing the power button five times rapidly.  
  3. Take a cotton swab and wipe the cartridge contacts clean.  
  4. Use a dry paper towel and wipe the body of the Yocan UNI Pro 3.0 Plus Box Mod clean.   
  5. Follow the charging instruction and use the dedicated charging cable for the Yocan UNI Pro 3.0 Plus Box Mod to avoid battery damage. 
  6. Make sure to charge the Yocan UNI Pro 3.0 Plus Box Mod before storing it too long. 

Note: Make sure to keep the parts dry before storing as it may cause mold buildup and may have negative effects if used. Use a dry paper towel or paper cloth after wiping the parts with a damp material. 

View product >