Vaporizers Chevron
Cartridge Vapes Chevron
Hot Knives
Parts & Accessories Chevron
Deals Chevron
Sub Brands Chevron
Wholesale
Account

Yocan UNI S Box Mod Vaporizer Manual

Everything you need to know to get started and make the most of your Yocan UNI S Box Mod Vaporizer.

Preparing the Yocan UNI S

  1. Charge the Yocan UNI S battery the first time you pull it out ofg the box.
  2. After charging the battery, power the Yocan UNI S on by pressing the power button 5 times quickly.

Note: The power button is the squarish (octagon) button located at the upper part of the device right above the Yocan branding.

Loading the Yocan UNI S Box Mod Vaporizer

  1. Connect the magnetic ring to your 510-thread cartridge.
  2. Slide the magnetic ring and cartridge combo into the cartridge chamber.
  3. Wait for the magnets to snap together.

 Note: Do not overtighten the magnetic connector and the cartridges. Stop twisting as soon as you feel some sort of resistance.

Vaping with the Yocan UNI S Box Mod Vaporizer

  1. Make sure that the Yocan UNI S Box Mod Vaporizer is fully charged before use to get the best results.
  2. Make sure to properly connect the cartridge and the magnetic connector.
  3. Press the power button five times to activate the battery.
  4. Select your preferred temperature setting.
  5. Press and hold the power button.
  6. Inhale from the mouthpiece when the Yocan UNI S Box Mod Vaporizer starts producing vapor.

Changing the Temperature Setting on the Yocan UNI S Box Mod Vaporizer

  1. Make sure that the battery is powered on by pressing the power button five times.
  2. Press the power button three times to toggle through the heat settings.

The heat settings are as follow.

  • Low – 2.5 volts
  • Medium – 3.0 volts
  • High – 3.5 volts

Care and Maintenance of the Yocan UNI S Box Mod Vaporizer

The Yocan UNI S Box Mod Vaporizer improves upon the UNI Box Mod which means it is made with few parts. This makes it easy to clean and maintain. The Yocan UNI S Box Mod Vaporizer is a cartridge vaporizer that requires only a few steps to clean because of its clever design and engineering. To clean and care for your Yocan UNI S Box Mod Vaporizer, follow the steps below.

  1. Wipe off any dirt or residue on the battery with a dry paper towel and continue to reassemble the Yocan UNI S Box Mod Vaporizer, make sure to wipe the metal connections clean too.
  2. Make sure to follow charging instructions and use the dedicated charger to avoid damaging the Yocan UNI S Box Mod Vaporizer.
View product >