Yocan Vane Portable Vaporizer Manual

Preparing the Yocan Vane

1. Make sure that you fully charge the Yocan Vane battery before use.
2. Once you have secured a fully charged battery, turn the vaporizer on by pressing the power button 5 times in two seconds.

Note: The power button is located at the upper part of the OLED screen facing outwards.

Loading the Yocan Vane

1. Prepare your botanicals, use an herb grinder to grind them into smaller and finer pieces for best results.
2. Open the ceramic chamber by lifting the magnetic mouthpiece away from the battery.
3. Carefully load the ground botanicals into the ceramic chamber.
4. Replace the mouthpiece by connecting it back to the magnetic connection of the battery.

Note: You can use a small piece of paper folded halfway to funnel the ground materials into the chamber to avoid wastage. Also, when grinding your herbs, flip the grinder upside down if you want a finer grind.

Vaping with the Yocan Vane

1. Make sure that the Yocan Vane is fully charged and is loaded with your select botanical strains before you start vaping.
2. After you have loaded the Yocan Vane, press your lips near the mouthpiece of the Yocan Vane and prepare to inhale.
3. Press and hold the power button of the Yocan Vane and once the Yocan Vane creates vapors pull and draw from the mouthpiece.
4. Repeat this process after the herbs are fully vaporized or you may stop after a full cycle.

Care and Maintenance of the Yocan Vane

The Yocan Vane is made with few parts which make it a solid device and is likewise easy to clean and maintain. The Yocan Vane is a dry herb vaporizer and requires only a few steps to clean especially its chamber. To clean your Yocan Vane, follow the steps below.

1. Wipe-off any dirt or residue on the battery with a dry paper towel and continue to reassemble the Yocan Vane.
2. Make sure to follow charging instructions and use the dedicated charger to avoid damaging the Yocan Vane.