Yocan Verve Cartridge Vaporizer Manual

Charging the Yocan Verve Cartridge Vaporizer

1. Take your USB type-C charging cable.
2. Connect it to the Yocan Verve Cartridge Vaporizer.
3. Find a compatible wall adapter or wall charger.
4. Plug the wall adapter to a wall socket.

Note: Make sure to use a compatible wall adapter and a charging cable when charging the Yocan Verve Cartridge Vaporizer. If you can’t find a wall adapter, you can plug the Yocan Verve Cartridge Vaporizer. There is no charging cable included in the box, you are to supply your own charging cable. The charging port is located at the bottom part of the vaporizer.

Preparing the Yocan Verve Cartridge Vaporizer

1. Make sure to fully charge the Yocan Verve Cartridge Vaporizer.
2. When you have fully charged the battery, there will be no need to press any buttons on the Yocan Verve Cartridge Vaporizer as it is draw activated.

Note: There is no button on the body of the Yocan Verve Cartridge Vaporizer. To activate the device, all you need to do is to inhale from the mouthpiece.

Loading the Yocan Verve Cartridge Vaporizer

1. Take your pre-filled cartridge out of the packaging.
2. Connect the cartridge to the 510-threaded connection on the base of the Yocan Verve Cartridge Vaporizer.
3. If you are using a refillable cartridge, remove the mouthpiece from the cartridge.
4. Load your preferred oil or wax in the cart.
5. Place the mouthpiece back into the cartridge.
6. Connect the cartridge to the 510-threaded connection on the base of the Yocan Verve Cartridge Vaporizer.

Changing the Yocan Verve Cartridge Vaporizer’s Voltage Level

1. Make sure to fully charge the Yocan Verve Cartridge Vaporizer.
2. There is no need to turn on the Yocan Verve Cartridge Vaporizer as it is draw activated.
3. Inhale from the mouthpiece three times to change the voltage level.
4. Look at the light bar at the bottom of the vaporizer to check what voltage level is activated.

Yocan Verve Cartridge Vaporizer Voltage Levels

1. 2.0 volts (White Light)
2. 2.6 volts (Blue Light)
3. 3.2 volts (Green Light)

Activating the Pre-Heat Setting for Yocan Verve Cartridge Vaporizer

1. There is no need to turn on the Yocan Verve Cartridge Vaporizer as it is draw activated.
2. Inhale from the mouthpiece two times to activate the device’s pre-heat setting.

Note: The pre-heat setting will heat the oils in a very low temperature of 1.8 volts for 10 seconds.

Care and Maintenance for Yocan Verve Cartridge Vaporizer

1. Make sure the Yocan Verve Cartridge Vaporizer is off.
2. Remove the cartridge and either clean it or replace it.
3. Get a dry paper towel or a cloth to clean the body of the Yocan Verve Cartridge Vaporizer.
4. Allow the parts to dry out before assembling them back together.
5. Avoid draining the battery if storing the Yocan Verve Cartridge Vaporizer for a long time.