Yocan Wulf Mods UNI X Cartridge Vaporizer Manual

Charging the Wulf Modz Uni X Cartridge Vaporizer

1. Take the USB type-C charging cable included in the box.
2. Connect it to the Wulf Modz Uni X Cartridge Vaporizer.
3. Find a compatible wall adapter or wall charger.
4. Plug the wall adapter to a wall socket.

Note: Make sure to use a compatible wall adapter and a charging cable when charging the Wulf Modz Uni X Cartridge Vaporizer. If you can’t find a wall adapter, you can plug the Wulf Modz Uni X Cartridge Vaporizer on your computer or your video game console.

Preparing the Wulf Modz Uni X Cartridge Vaporizer

1. Make sure to fully charge the Wulf Modz Uni X Cartridge Vaporizer.
2. When you have fully charged the battery, you can power on the Wulf Modz Uni X Cartridge Vaporizer by pressing the power button five times rapidly.

Note: Pressing the power button five times when powered on will cause it to turn off. The power button is located on the middle of the battery right above the “UNI X” branding.

Loading the Wulf Modz Uni X Cartridge Vaporizer

1. Take your pre-filled cartridge out of the packaging.
2. Connect the 510-threaded magnetic adapter to the cartridge.
3. Slide the cartridge to the base and wait for the magnets to snap back together.
4. If you are using a refillable cartridge, remove the mouthpiece from the cartridge.
5. Load your preferred oil in the cart.
6. Place the mouthpiece back into the cartridge.

Changing the Wulf Modz Uni X Cartridge Vaporizer’s Voltage Level

1. Make sure to fully charge the Wulf Modz Uni X Cartridge Vaporizer.
2. Turn the Wulf Modz Uni X Cartridge Vaporizer on by pressing the power button five times quickly.
3. When powered on, press the power button three times to change the temperature setting.
4. Let go of the power button.

Wulf Modz Uni X Cartridge Vaporizer Temperature Levels

• 2.0 volts (White Light)
• 2.6 volts (Blue Light)
• 3.2 volts (Green Light)
• 3.8 Volts (Red Light)

Activating the Pre-Heat Setting for Wulf Modz Uni X Cartridge Vaporizer

1. Power the Wulf Modz Uni X Cartridge Vaporizer on by pressing the power button five times rapidly.
2. Press the power button twice to activate pre-heat setting.
3. Press the power button for two more times to deactivate pre-heat mode.

Care and Maintenance for Wulf Modz Uni X Cartridge Vaporizer

1. Make sure to power the Wulf Modz Uni X Cartridge Vaporizer off.
2. Remove the cartridge and either clean it or replace it.
3. Get a dry paper towel or a cloth to clean the Wulf Modz Uni X Cartridge Vaporizer body.
4. Allow the parts to dry out before assembling them back together.
5. Avoid draining the battery if storing the Wulf Modz Uni X Cartridge Vaporizer for a long time.