Yocan Ziva Pro Smart Vaporizer Mod Manual

Charging the Yocan Ziva Pro Smart Vaporizer Mod

1. Get a USB Type-C charging cable and connect it to the port located at the bottom or base of the Yocan Ziva Pro Smart Vaporizer Mod.
2. Take the other end of the charging cable and connect it to a power brick, and then plug it into a wall socket.

Note: Alternatively, you may connect the charging cable to a desktop, laptop, or a compatible game console to recharge the Yocan Ziva Pro Smart Vaporizer Mod. The charging port is located on the bottom part of the device.

Preparing the Yocan Ziva Pro Smart Vaporizer Mod

1. Make sure to fully charge the Yocan Ziva Pro Smart Vaporizer Mod to get the best results.
2. After making sure that the battery is fully charged, hit the power (touch) button five times quickly to power on the Yocan Ziva Pro Smart Vaporizer Mod.

Note: The touch button is the haptic button located right above the OLED screen. You may check the battery level of the Yocan Cyclo Vaporizer through the same OLED display.

Loading the Yocan Ziva Pro Smart Vaporizer Mod

1. Prepare your wax concentrates or oils.
2. Load the materials inside the cartridge that is included with the Yocan Ziva Pro Smart Vaporizer Mod packaging.
3. Remove the mouthpiece by pulling it away from the magnetic atomizer base.
4. Screw the cartridge onto the base and secure the threaded connection.
5. You may replace the mouthpiece by sliding it back in place and waiting for the magnetic links to lock in place.

Note: Should any issue arise, simply remove the cartridge and replace it.

Replacing the cartridge on the Yocan Ziva Pro Smart Vaporizer Mod

1. Make sure that the Yocan Ziva Pro Smart Vaporizer Mod is powered off and has cooled down.
2. Remove the mouthpiece.
3. Twist the cartridge counterclockwise to loosen it from the base.
4. Replace the cartridge by twisting it clockwise.
5. Place the mouthpiece back on top of the base.

Note: Avoid twisting the cartridge too much as it may cause the threads to become loose. Avoid overtightening the cartridges, stop when you feel some resistance in your finger.

Vaping with the Yocan Ziva Pro Smart Vaporizer Mod

1. Make sure that you have fully charged the battery of the Yocan Ziva Pro Smart Vaporizer Mod, installed your cartridge correctly, and loaded the device with your preferred wax concentrates or oils.
2. Press the power button five times quickly to activate the battery.
3. Inhale from the mouthpiece to trigger the heating element.
4. Repeat this process as necessary or until the extracts in the cartridge are consumed.

Changing the voltage level of the Yocan Ziva Pro Smart Vaporizer Mod

1. Make sure that the Yocan Ziva Pro Smart Vaporizer Mod is powered on, press the power button five times quickly if it is still powered off.
2. Once you have selected your preferred temperature level, leave the buttons and the device will automatically read your selection.

Note: Increasing the voltage setting will allow the Yocan Ziva Pro Smart Vaporizer Mod to produce more vapor that is more potent. Meanwhile, lowering the voltage setting will allow it to produce thinner vapor that is more flavorful.

Yocan Ziva Pro Smart Vaporizer Mod Voltage Range

• From 1.8 volts to 4.2 volts

Removing and Replacing the Mouthpiece of the Yocan Ziva Pro Smart Vaporizer Mod

1. Pull the Yocan Ziva Pro Smart Vaporizer Mod’s mouthpiece (which is connected to the aluminum body) until the magnetic connection is fully severed.
2. Place the mouthpiece and device close together to create a magnetic connection.
3. Wait for the magnetic base and the mouthpiece to snap back in place.

Note: You can clean the base of the magnetic connection when you remove the mouthpiece. This will help you enjoy clean sessions.

Care and Maintenance of the Yocan Ziva Pro Smart Vaporizer Mod

The Yocan Ziva Pro Smart Vaporizer Mod is made with relatively few parts making it a device that’s easy to take care of. Follow the steps below on how you can clean and take care of your Yocan Ziva Pro Smart Vaporizer Mod.

1. Wipe off any dirt or residue on the Yocan Ziva Pro Smart Vaporizer Mod battery using a dry paper towel or some alcohol wipes. Continue to reassemble the vaporizer.
2. Follow the charging instructions and use an appropriate charging cable to prolong the life of the Yocan Ziva Pro Smart Vaporizer Mod.
3. For maintaining the cartridges, make sure to refrain from using any hard objects to tamper with the heating element. In the event of a damaged cartridge, remove it and replace it with a new one immediately.

Yocan Ziva Pro Smart Vaporizer Mod QR Code

1. Scan the QR code printed on the sticker in front of the vaporizer.
2. Follow instructions on the QR code for more tips in operating the Yocan Ziva Pro Smart Vaporizer Mod.  

Note: For more information on how to operate the Yocan Ziva Pro Smart Vaporizer Mod, scan the QR code on the sticker. It should say that the power button is not at the bottom.