About Yocan Kodo Box Mod
Yocan Kodo Box Mod FAQs
What is the Yocan Kodo battery specs?
The Yocan Kodo uses a 400mAh battery.
Is it 510-threaded?
Yes, the Yocan Kodo is 510-threaded.
What are the Yocan Kodo voltage settings?
The Yocan Kodo voltage settings are 2.5V, 3.0V, and 3.5V.
What is the dimension?
The Yocan Kodo measures 53mm x 20mm x 17.5mm.
Yocan Kodo Manual
Preparing the Yocan Kodo Box Mod Vaporizer
- Make sure that your Yocan Kodo Box Mod is completely charged before use for ideal results.
- After making sure that your battery is fully charged, turn the Yocan Kodo Box Mod Vaporizer on by clicking on the power button 5 times rapidly. Note: The power button is located at the upper portion of the battery just right below the 'Kodo’ logo. The power button is the square button that sits above the three LED light indicators.
Loading the Yocan Kodo Box Mod Vaporizer
- Prepare your cartridges, place them somewhere where there’s a leveled platform so the cartridges will remain safely in place.
- Attach your cartridge to the receiving end of the Yocan Kodo Box Mod Vaporizer. Note: Do not over tighten the magnetic adapter as it may cause the threads to get loose. This may cause other cartridges to experience a loose connection affecting the flow of electricity and the overall performance of the Yocan Kodo Box Mod Vaporizer.
Vaping with the Yocan Kodo Box Mod Vaporizer
- Make sure that the Yocan Kodo Box Mod Vaporizer is fully charged and is loaded with your select cartridge before you start vaping.
- After you have loaded the Yocan Kodo Box Mod Vaporizer, press your lips near the mouthpiece of the cartridge and prepare to draw.
- Press and hold the power button of the Yocan Kodo Box Mod and once the Yocan Kodo Box Mod Vaporizer creates vapors pull and draw from the mouthpiece of the cartridge.
- Repeat this process as necessary or until the extracts inside the cartridge is fully consumed.
Switching Through the Temperature Settings
- Power the Yocan Kodo Box Mod Vaporizer on by clicking the power button 5 times.
- Tap the power button three times rapidly to toggle in between heat settings.
- Check the LED lights to find if the corresponding action took effect.
- Release the power button to allow the selected heat setting to take effect on the Yocan Kodo Box Mod Vaporizer.
Below are the corresponding heat settings and their respective voltage levels.
- One Green Light: Low Setting
- Two Green Light: Medium Setting
- Three Green Light: High Setting
Care and Maintenance of the Yocan Kodo Box Mod Vaporizer
The Yocan Kodo Box Mod Vaporizer was made to accommodate almost all cartridges on the market today. The Yocan Kodo Box Mod in itself is just a Box Mod with no atomizers included in it and it does not come with any cartridge out of the box as well. To ensure your Yocan Kodo Box Mod Vaporizer stays in good shape, follow the steps below.
- Wipe-off any liquid residue on the vaporizer with a dry paper towel and continue with reassembling the Yocan Kodo Box Mod Vaporizer.
- Make sure to follow charging instructions and use the dedicated charger to avoid damaging the Kodo Box Mod.