Yocan Red Rush Torch Manual

Operating the Yocan Red Rush Torch

1. Make sure the trigger is not locked.
2. Press the trigger and hold the button.

Note: The locking and unlocking mechanism of the Yocan Red Rush Torch can be found on the side of the trigger. Just right on the heat resistant silicone rubber grip.

Adjusting the flame of the Yocan Red Rush Torch

1. Locate the adjustment knob on the Yocan Red Rush Torch.
2. Slide the switch to the left to decrease the heat and reduce the reach.
3. Slide the switch to the right to increase heat and improve the reach.

Note: The adjustment tool can be found on the side of the Yocan Red Rush Torch’s handle.

Checking the Fuel Tank of the Yocan Red Rush Torch

1. Make sure that the nozzle of the Yocan Red Rush Torch powered off.
2. Check the silicone hand grip of the Yocan Red Rush Torch.
3. Look at the visible tank at the pistol hand grip.
4. Check how much butane is still in the eight-gram tank.

Refilling the Yocan Red Rush Torch

1. Turn the Yocan Red Rush Torch upside down.
2. Get your butane canister and prop the pump tube to the refilling slot.
3. Press the butane canister down until the butane tank is full.

Note: Check the window to see how much butane has been loaded.

Cleaning and maintenance of the Yocan Red Rush Torch

1. Wipe the Yocan Red Rush Torch with either a damp cloth or a clean dry paper towel.
2. Clean any dirt, grime, or residue.
3. Always keep the Yocan Red Rush Torch standing upright (unless when refilling) to avoid leaks.

Note: The Yocan Red Rush Torch is designed to stand upright during storage.