Yocan Zeus Vaporizer Manual

Preparing the Yocan Zeus Vaporizer

1. The first step is to fully charge the Yocan Zeus Vaporizer before use. This will allow you to experience the full potential of the Yocan Zeus Vaporizer.
2. After the Yocan Zeus Vaporizer is fully charged, turn it on by clicking the power button 5 times. Note: The power button is located at the middle part of the battery facing outwards just above the Yocan Zeus icon.
3. Next, you can sterilize the heating element on the Yocan Zeus Vaporizer by pressing and holding the power button for 5 seconds two or three times consecutively. Note: perform sterilization during the first time you receive your Yocan Zeus Vaporizer. This will eliminate and get rid of any impurities that might have made its way to the heating chamber during the manufacturing process.
4. After you’re done with sterilization, let the vaporizer sit and cool down for about 2 – 3 minutes. After it cools down, you can start loading your select concentrates to the Yocan Zeus Vaporizer.

Loading the Yocan Zeus Vaporizer

1. Set your concentrates on a piece of parchment paper, a dab mat, or any container where you can safely pick your concentrates when loading.
2. Make sure you’ve prepared your Yocan Zeus Vaporizer first especially if it’s the first time you’re using it. Note: Follow steps for preparing the Yocan Zeus Vaporizer.
3. Flip the mouthpiece upwards to reveal the Yocan Quartz Dual Coils (QDC) or the Yocan Ceramic Donut Coils. Removing the mouthpiece exposes the coils.
4. Load desired amount of concentrate onto the coil. Note: Make sure that the dab tool does not touch the coils as contact with another metal may cause the coils to break or get damaged. Simply drop the concentrates atop the QDC or onto the Yocan Ceramic Donut Coils.
5. Snap the mouthpiece back to close the opening where you can access the coils. Note: The mouthpiece flips open and snaps back in place through the magnetic connections making reloading and maintenance easy and straightforward.

Vaping with the Yocan Zeus Vaporizer

1. Make sure that you have properly sterilized the Yocan Zeus Vaporizer before use. Also, make sure that you’ve correctly loaded the coils prior to your vaping session.
2. After you’ve secured your desired amount of concentrates onto your desired coil, take the mouthpiece close to your lips against it and prepare to pull from the mouthpiece.
3. Press and hold the power button to activate the heating element at the same time inhale the vapors are produced by the Yocan Zeus Vaporizer.
4. Repeat this process as necessary or as the concentrates are fully consumed.

Care and Maintenance of the Yocan Zeus Vaporizer

The Yocan Zeus Vaporizer has few parts that are connected with strong and durable magnets which all he more makes it a solid and sturdy device. At the same time, it is easy to clean and maintain. To clean your Yocan Zeus Vaporizer, follow the steps below.

1. Turn your Yocan Zeus Vaporizer on. Five clicks will turn it on and five clicks turns it off.
2. Turn the Yocan Zeus Vaporizer upside down.
3. Commence doing a burn-off by pressing and holding the power button for 5 seconds. Repeat this process 2 – 3 times consecutively. This will cause any wax concentrate residue to melt or evaporate.
4. Let the vaporizer cool down.
5. Wipe off the Yocan Zeus Vaporizer and the parts with a dry paper towel and reassemble.