Yocan Evolve Plus Ceramic Coils

Changing the Yocan Evolve Plus Ceramic Coils:

1. Remove the Yocan Evolve Plus Mouthpiece by twisting the mouthpiece counterclockwise.
2. Remove the Yocan Evolve Plus Ceramic Coils by twisting it counterclockwise.
3. Clean the metal contacts using a cotton swab.
4. Take your replacement Yocan Evolve Plus Ceramic Coils and connect it to the battery.

Note: Avoid overtightening the coils. Stop tightening as soon as you feel resistance.

Loading the Yocan Evolve Plus Ceramic Coils:

1. Remove the mouthpiece by twisting the mouthpiece counterclockwise from the base.
2. Remove the coil cap from the coil chamber by twisting it in the similar counterclockwise motion.
3. Use your dab tool to scoop up a reasonable amount of wax concentrates and load the wax concentrates onto the Yocan Evolve Plus Ceramic Coils.
4. Replace the coil cap back on the coil chamber and screw it clockwise.
5. Replace the mouthpiece back to the atomizer base by screwing it back in place.

Note: Do not remove the mouthpiece and the coil cap when hot. Let it cool down before removing it. You can also use the tip of the dab pen and insert it on the hole of the coil cap to easily remove the coil cap if it gets sticky.

Cleaning the Yocan Evolve Plus Ceramic Coils:

1. Let the mouthpiece and the coil cool down if you’re cleaning it after a session.
2. Remove the mouthpiece from the atomizer base by twisting it counterclockwise.
3. Remove the coil cap by twisting it counterclockwise.
4. Remove the Yocan Evolve Plus Ceramic Coils by unscrewing it out of the base.
5. Take a small bowl and fill it with isopropyl alcohol.
6. Soak the coil in the bowl of alcohol for a few hours.
7. Let the atomizer and its components dry on a paper towel.
8. Connect the Yocan Evolve Plus Ceramic Coils back on the battery.

Note: You can stir the atomizer while in the bowl of alcohol to help loosen any hardened buildup. You can also use a brush to lightly stroke the atomizer to remove any dirt or debris.